Frame & chassis powder coatings MT-A400 series
Product Overview:
Weather-resistant pure polyester powder coatings designed for frame and chassis parts
Coating characteristics:
– High corrosion resistance
– Excellent bending resistance
– Excellent stone impact resistance and UV resistance
Application:Suitable for frame and chassis parts of various models
Application parameters:
Curing time: 180~200tCx10~15 minutes
Spraying method: high voltage electrostatic spraying 60~80KV
Physical properties
Recommended film thickness: 60-150 um
| Project | Instrument | Judgment standard | Test standard |
| Pencil hardness | Pencil hardness tester | A 1H | GB/T 6739 ASTM D 3363 |
| Impact resistance | Impact tester | 50 kg.cm (8mm diameter)
2.5Nm (16mm diameter) (20mm diameter) |
GB/T1732 ASTM D 2794 ISO 6272 |
| Bending resistance | Bending tester | v2mm
Cylindrical shaft |
GB/T 6742
ASTM D 1737 |
| Adhesion | Hundred grid test | Grade 0 | GB/T 9286 ISO 2409 ASTM D 3359 |
| Cupping | Cupping instrument | M 6 mm | GB/T9753 ISO 1520 |
| Salt spray resistance | NSS salt spray | &600H, WbW2mm | GB/T1771 ASTMB-117 ISO 7253 |
| Moisture and heat resistance | Constant temperature and humidity chamber | M 1000H slight gloss loss | GB/T1740 ISO 6270 |
| Weather resistance | Aging test chamber | QUV-B313 500H N 3 level | GBZT 1865 ISO 11341 |
| Motor oil resistance | L—E10# | No surface change after 24 hours of immersion | GB/T 1734 |
| Anti-Stone Impact | Anti-Stone Impact Tester | W3 | SAEJ400 |
•The above tests all use 0.8mm degreased and derusted cold-rolled steel plates, with a coating thickness of 60 to 80um. The performance indicators of the coating will vary slightly with the gloss.
Environmental requirements:This product does not contain heavy metals such as tin, selenium, lead, hexavalent chromium, mercury, dart, cadmium, etc., and fully complies with RoHS 2.0 environmental requirements.
Explanation:We will provide complete powder coating consultation and application customization solutions based on the actual needs of each customer. The various test indicators mentioned in this report are all laboratory test data for reference only and are not intended as performance commitments for product applications. The results will vary with environmental factors and other conditions.
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Polyethylene (PE) Powder Coatings | We provide a complete range of Polyethylene (PE) Powder Coatings, manufactured in China and shipped globally to serve B2B clients across various se... |
 |
Glossy and Bright Yellow Powder Coating | Introduction High gloss powder coating is a kind of excellent performance coating, with the following characteristics: – Appearance perform... |
 |
Yellow matte powder coating | Surface Finish Options Overview This series of powder coatings adopts an environmentally friendly formula system, specially designed for electro... |
 |
Epoxy Anti-Corrosion Powder Coating for Reinforcing Steel | Surface Finish Options Overview Product Introduction: This is a thermosetting epoxy-modified heavy-duty anti-corrosion powder coating specifica... |
 |
Functional Material Powder Coatings | Introduction 1. Targeted Solutions for Industrial Challenges Functional powder coatings address industry-specific needs where traditional coating... |
Похожие товары
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | Продавец: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | Продавец: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | Продавец: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | Продавец: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | Продавец: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
