Weather-resistant matte powder coating
Product description
This series of products uses saturated polyester resin and acrylic resin as the main base materials to make thermosetting powder coating.
Product characteristics
- The gloss can reach 2-5% (60°), soft and pleasing to the eye;
- Good fluidity, smooth and delicate appearance and feel;
- Suitable for long-term outdoor use;
- Good adhesion and good impact resistance;
- Good baking yellowing resistance;
- Reasonable price and low cost.
Application areas
1. Outdoor lamps;
2. Courtyard leisure facilities;
3. Building materials;
4. Aluminum ceilings and profiles;
5. Other outdoor low-gloss coatings.
Transportation packaging
Carton packaging, lined with two layers of polyvinyl chloride plastic bags, net weight of each box is 20kg. Non-hazardous items can be transported in various ways, but should be kept away from direct sunlight, moisture and heat, and contact with chemicals.
Hygiene and safety
Operators should wear dust masks during use to avoid inhaling dust and minimize long-term contact between skin and powder coating. Paint attached to the skin can be washed with soap.
Powder properties
| Specific gravity | 1.4~1.8g/cm’ (depending on the formula and color) |
| Particle size | Depending on the purpose, the standard type has an average particle size of 35~40 microns, less than 10 microns of powder <10%, more than 100 microns of powder <0.5%. |
| Storage stability | Outdoor matte powder coatings should be stored in a dry, ventilated room below 30°C, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stably stored for 6 months. If it exceeds the period, it must be re-tested. If the result meets the requirements, it can still be used. |
Film properties
| Test items | Inspection standard or method | Inspection index |
| Appearance | Visual inspection | Various board surface effects |
| Impact | GB/T 1732 | ≥50Kg·cm |
| Bending | GB/T 6742 | ≤2mm |
| Cupping | GB/T 9753 | ≥8mm |
| Hardness | GB/T 6739 | ≥H~2H |
| Adhesion | GB/T 9286 | Level 0 |
| Neutral salt spray resistance | GB/T 1771 | 500h; Scribed area: unidirectional rust ≤2.0mm; Unscribed area: no abnormality |
| Moisture and heat resistance | GB/T 1740 | 500h No abnormality |
| Artificial weather aging resistance | GB/T 1865 | 800h; Discoloration ≤2 level; Gloss loss ≤2 level |
| The above coating performance indicators may decrease slightly as the gloss decreases. | ||
| Spraying | This series of products are suitable for the following spraying methods: corona electrostatic spraying; friction electrostatic spraying; electrostatic fluidized bed spraying; fluidized bed hot dip coating. | |
| Coating thickness: Use between 40~150 microns, recommended film thickness is 50~80 microns. | ||
| Curing conditions | 200℃/15 minutes is recommended, and it can also be designed according to user needs:180℃/15min etc. | |
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Wood grain powder coating | Product introduction Conventional series wood grain – suitable for standard decorative purposes; E series high-definition wood grain &ndash... |
 |
Powder coating for 3C products | WA：+86 132 6275 2056 WEB: std-coatings.com Product description Powder coating for 3C products has good adhesion and corner coverage, impact re... |
 |
Textured Powder Coatings – Factory Direct MOQ 100KG | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Our Textured Powder Coating Advantages Distinct Surface Texture – wrinkle, hammer... |
 |
High-Temperature Resistant Powder Coating | Product Introduction:High-temperature resistant coatings are typically defined as those whose films do not change color, do not flake off, and can ... |
 |
Sand grain matte MT-01981036 | Introduction No. MT-019/81036 Color Black Surface Sand grain matte System Weather-resistant polyester Scope of appli... |
Похожие товары
 |
Heat Sealing Sterilization Pouch | Продавец: Hopeway AMD | Heat Sealing Sterilization Pouch is designed for secure medical instrument packaging, supporting ... |
 |
Catalytic Converter Scrap Supplier, Catalytic Converter Scrap for Sale, , Catalytic Converter Scrap, Catalytic Scrap for Sale, Catalytic Scrap Supplier, Scrap Catalytic Supplier | Продавец: Trucont LLC | В компании Trucont LLC мы постоянно предлагаем лом каталитических преобразователей для немедленно... |
 |
Epimedium Extract | Продавец: Fruit Powder,Vegetable Powder | Product Name: Epimedium ExtractLatin Name: Epimedium Sagittatum Maxim.Specification: Icariin 5%, ... |
 |
Pumpkin Powder | Продавец: Fruit Powder,Vegetable Powder | Product Name: Pumpkin PowderLatin Name: Cucurbita pepo L.Used Part: FruitAppearance: yellow fine ... |
 |
Broccoli Powder | Продавец: Fruit Powder,Vegetable Powder | Product Name: Broccoli powder Latin Name: Brassica oleracea L.var.italic Planch. Used Part: Who... |
