.

Powder coating primer containing zinc

Product Description

MT-PZ is a powder coating primer containing zinc which is designed to give enhanced corrosion protection of mild steel. This duplex system combines cathodic protection and barrier effect. Dedicated to steel protection with a surface pre-treatment obtained by grit/shot blasting. MT-PZ is based on a specific epoxy zinc rich formulation that brings conductivity to enable the cathodic protection. MT- PZ includes a specific anticorrosive function which improves the protection in case of scratch. Qualisteelcoat approval: Base Material: Steel PE-0097 2 coat system – up to C4-H, mechanical pretreatment.

Powder Properties

Chemical type Thermosetting epoxy
Appearance Smooth
Gloss level(60°) 45-65units
Color Grey (about RAL7012)
Recommended Film Thickness (µm) 70 – 120 µm
Density (g/cm3) 2.1g/cm³
Application Electrostatic
Storage Under dry, cool (≤ 30°C) conditions
Shelf life 12monthsbelow25°C

Pretreatment

Surface preparation depends upon the metal, the type of surface, its conditions and the required performance. See our recommendation for pretreatment to be used with MT-PZ.

Substrate Mechanical pretreatment Chemical pretreatment
Mild steel Grit Blasting Sa 2.5 in accordance with ISO NF EN 8501-1. Roughness: Rz 35 60 µm / Ra 6-12 µm Banned
Cast steel
Electro Zinc steel Banned
Hot dip galvanized steel
Zinc sprayed (gas flame/electrical deposition)

Application

MT-PZ is suitable for corona electrostatic spraying. Tribo application is not recommended.

Application settings Fluidizing air pressure: 1.5kg/cm2 initially then 1kg/cm2

Transport air pressure: 0.5 to 0.8 kg/cm

Recommended voltage: 65 to 70kV

Curing limits Primer should be cured, or at least gelled, using the recommended curing schedules, before application of the topcoat. The object temperature must not be below 110°C or above 180°C.

The primer should be cured in a convection oven, optionally with infra-red heaters, with air temperature not exceeding 180°C.

Recommended film thickness 70-120 µm A good protection is linked with the recommended film thickness.
Recycling Trials, with suitable recycling equipment, must be carried out before commencing production. Attention should be paid to the ratio of new powder, a minimum of 70% must be used. Gun nozzles must be cleaned every 30 minutes.

If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.


Отправить запрос, связаться с поставщиком

Кому: Standard International Group (HK) Limited
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Conductive Powder Coating
Conductive Powder Coating Product Features: Dissipates static electricity to protect the normal operation of low-voltage or micro-electronic components. Prevents the occur...
Medical device friction powder
Medical device friction powder Introduction Accurate selection of powder has always been a problem for the powder industry. To solve this problem, we name the powder accordi...
Purple powder coating
Purple powder coating Purple Powder Coating – Classification, Applications & Advantages ClassificationTypical ApplicationsProduct Advantages Glossy...
Antibacterial Powder Coating
Antibacterial Powder Coating 1. Core Resin Chemistry & Performance Matrix Selecting the appropriate resin system is critical for balancing durability, aesthetics, and envi...
Metallic flat matte MT-629/94737
Metallic flat matte MT-629/94737 Introduction No. MT-629/94737 Color Metallic gray Surface Metallic flat matte System Super weather-resistant polyeste...
Все товары поставщика

Похожие товары

Epimedium Extract
Epimedium Extract Продавец: Fruit Powder,Vegetable Powder Product Name: Epimedium ExtractLatin Name: Epimedium Sagittatum Maxim.Specification: Icariin 5%, ...
Pumpkin Powder
Pumpkin Powder Продавец: Fruit Powder,Vegetable Powder Product Name: Pumpkin PowderLatin Name: Cucurbita pepo L.Used Part: FruitAppearance: yellow fine ...
Broccoli Powder
Broccoli Powder Продавец: Fruit Powder,Vegetable Powder Product Name: Broccoli powder Latin Name: Brassica oleracea L.var.italic Planch. Used Part: Who...
Pomegranate Powder
Pomegranate Powder Продавец: Fruit Powder,Vegetable Powder Product Name: Pomegranate PowderLatin Name: Punica granatum linn.Used Part: Fruit juiceAppearance...
Orange Powder
Orange Powder Продавец: Fruit Powder,Vegetable Powder Product Name: Orange PowderLatin Name: Citrus sinensisUsed Part: Fruit juiceAppearance: Light yel...