Pure polyester/TGIC powder coating
Product description
This series of products uses saturated polyester resin and TGIC curing agent as the main base material to make thermosetting powder coating.
Product characteristics
- Good adhesion, good mechanical properties, tough coating film, meeting high strength requirements;
- Smooth coating film, high gloss;
- Suitable for long-term outdoor exposure product coating, good outdoor durability;
- Excellent over-baking resistance.
Special effects
Various wrinkles, metal, pearlescent effects and mixed colors, etc.
Application areas
Suitable for various long-term outdoor exposure product coating:
1.Household appliances:outdoor units of air conditioners, indoor appliances and lamps with high lighting conditions;
2.Construction industry applications:colorful curtain walls, door and window frames, ceilings with high lighting conditions;
3.Traffic facilities:highway guardrails and grilles; 3. Auto parts, sports facilities, fitness equipment, gas station equipment, and courtyard facilities.
Transport packaging
Carton packaging, lined with two layers of PVC plastic bags, net weight of each box is 20kg. Non-dangerous goods can be transported in various ways, but should be kept away from direct sunlight, moisture and heat, and contact with chemicals.
Hygiene and safety
Operators should wear dust masks during use to avoid inhaling dust, and minimize long-term contact between skin and powder coating. Paint attached to the skin can be washed with soap.
Powder properties
| Specific gravity | 1.4~1.8g/cm” (depending on the formula and color) |
| Particle size | Depending on the purpose, the standard type has an average particle size of 35~40 microns, less than 10 microns powder <10%, greater than 100 microns powder <0.5%. |
| Volatile matter | <1% |
| Softening point | 60~95℃ varies depending on the color gloss |
| Storage stability | Polyester/TGIC powder coatings should be stored in a dry, ventilated room below 35℃, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stably stored for 12 months. If it exceeds the period, it must be re-tested. If the result meets the requirements, it can still be used. Note: For low-temperature curing types and powders with a gloss of less than 40% (60″), the storage temperature should be below 30℃. |
Coating properties
| Test items | Inspection standard or method | Inspection index |
| Appearance | Visual inspection | Various board surface effects |
| Impact | GB/T 1732 | ≥50Kg·cm |
| Bending | GB/T 6742 | ≤2mm |
| Cupping | GB/T 9753 | ≥8mm |
| Hardness | GB/T 6739 | ≥H~2H |
| Adhesion | GB/T 9286 | Level 0 |
| Neutral salt spray resistance | GB/T 1771 | 500h; Scribed area: unidirectional rust ≤2.0mm; Unscribed area: no abnormality |
| Moisture and heat resistance | GB/T 1740 | 500h No abnormality |
| Artificial weather aging resistance | GB/T 1865 | 800h; Discoloration ≤2 level; Gloss loss ≤2 level |
| The above coating performance indicators may decrease slightly as the gloss decreases. | ||
| Spraying | This series of products are suitable for the following spraying methods: corona electrostatic spraying; friction electrostatic spraying; electrostatic fluidized bed spraying; fluidized bed hot dip coating. | |
| Coating thickness: Use between 40~150 microns, recommended film thickness is 50~80 microns. Average coverage: 10~12 square meters/kg, film thickness 60 microns (calculated based on 100% usage rate) | ||
| Curing conditions | 200℃/10 minutes is recommended, and it can also be designed according to user needs: 160C/20 minutes, 180℃/10 minutes, etc. | |
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
FEVE fluorocarbon powder coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction FEVE (Fluoroethylene Vinyl Ether) fluorocarbon powder coating represents a... |
 |
Epoxy Powder Coating | Introduction The main components are epoxy resin and curing agent. Brief description It is mainly composed of epoxy resin and curing agent. Fea... |
 |
High Transfer Efficiency (HTE) Powder | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com exceptional adhesion and strength, HTE powder coatings are engineered to electrostatica... |
 |
Outdoor Powder Coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product introduction Resistant to sunlight, rain and dew, and good heat resistance;... |
 |
Semi-Gloss Powder Coatings | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction Our semi-gloss powder coatings are perfect for a wide range of applica... |
Похожие товары
 |
Epimedium Extract | Продавец: Fruit Powder,Vegetable Powder | Product Name: Epimedium ExtractLatin Name: Epimedium Sagittatum Maxim.Specification: Icariin 5%, ... |
 |
Pumpkin Powder | Продавец: Fruit Powder,Vegetable Powder | Product Name: Pumpkin PowderLatin Name: Cucurbita pepo L.Used Part: FruitAppearance: yellow fine ... |
 |
Broccoli Powder | Продавец: Fruit Powder,Vegetable Powder | Product Name: Broccoli powder Latin Name: Brassica oleracea L.var.italic Planch. Used Part: Who... |
 |
Pomegranate Powder | Продавец: Fruit Powder,Vegetable Powder | Product Name: Pomegranate PowderLatin Name: Punica granatum linn.Used Part: Fruit juiceAppearance... |
 |
Orange Powder | Продавец: Fruit Powder,Vegetable Powder | Product Name: Orange PowderLatin Name: Citrus sinensisUsed Part: Fruit juiceAppearance: Light yel... |
