Low Cure Powder Coating – Energy-Saving Custom Solutions

• 

Most powder coating chemistries required relatively high curing temperatures ranging from 350-400°F (177-204°C) for 5-20 minutes (substrate temperature).

Why Use Low-Temperature-Cure Powder Coating：

Finishers may use low-temperature-cure powder coatings for a variety of reasons, such as energy savings and opportunities to coat heat-sensitive substrates. Energy savings scenarios typically use powder coatings capable of curing at around 325°F (163°C) instead of a more conventional 375°F (191°C) cure. Heat-sensitive substrates require powder coatings capable of curing below 300°F (149°C) and preferably around 250-260°F (121-127°C).

Low-Temperature Curing vs. Ultra-Low-Temperature Curing：

It is important to differentiate between coatings technologies designed for relatively straightforward energy reduction (i.e., “low-temp-cure” or LTC) vs. the more complex proposition of “ultra-low-cure” (ULC) powder technology designed for application to heat-sensitive substrates. Ideally, an LTC powder will reduce needed oven operating temperatures with minimal alteration to an existing application process. ULC technology, by its nature, usually involves specialized transport, handling, storage, and application/curing equipment.

Energy Savings with LTC Powder Coating Technology：

Reducing oven curing temperatures can provide quantifiable savings in operating costs. LTC powder coatings are available from most powder coating suppliers and usually carry a modest premium. The energy savings to replace a standard curing product with an LTC alternative can be determined by comparing the fuel costs to cure coated parts at standard vs. low bake oven conditions.

We are a professional powder coating manufacturer specializing in Low Cure Powder Coating designed to deliver excellent finish quality at reduced curing temperatures. Based in China, our factory provides energy-efficient powder coatings that minimize heat damage to sensitive substrates like plastics and thin metals. With a flexible MOQ of 100KG and competitive pricing, we help you achieve superior coatings with lower energy costs and faster production cycles.

Product Advantages Overview

Другие товары поставщика

	PVF oil pipe coating	Product Introduction Used for automobile oil pipes. PVF coating characteristics: (PVF) coating is the abbreviation of polyvinyl fluoride (Polyvi...
	Low Temp Cure&Environment friendly Polyester Powder Coatings	Feature: -Good adhesion and good mechanical properties -Good flowing and glossy -Good chemical resistance and corrosion resistance -Over 120um ...
	Brake pad powder	Introduction Accurate selection of powder has always been a problem for the powder industry. To solve this problem, we name the powder according t...
	Epoxy polyester powder coating	Product model GA, SF, FX, etc. Product characteristics The coating has good decorative properties, good adhesion and excellent mechanical proper...
	Gray wrinkle color powder coating	COLORS AVAILABLE RAL colors coating powder Pantone colors Color-matching regarding customer requirement is available PHYSICAL PROPERTIES Speci...

Похожие товары

	5.4,4'-Oxydiphenol CAS 1965-09-9	Продавец: Yufeng International Group Co., Ltd	Product Name: 4,4'-Oxydiphenol Synonyms: 4,4'-Dihydroxydiphenyl ether 4,4'-Oxydiphenol Bis(4-...
	1,1,2,2-Tetrachloroethane CAS 79-34-5	Продавец: Yufeng International Group Co., Ltd	Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Tetrachloroethane Acetylene te...
	3.Chlorotrifluoroethylene (CTFE) CAS 79-38-9	Продавец: Yufeng International Group Co., Ltd	Synonyms: CHLOROTRIFLUOROETHYLENE 79-38-9 CTFE Chlorotrifluoroethene 1-Chloro-1,2,...
	2.1,1,2-Trichloroethane CAS 79-00-5	Продавец: Yufeng International Group Co., Ltd	Product Name: 1, 1，2-Trichloroethane CAS: 79-00-5 Synonyms:79-00-5, Vinyltrichloride, beta-...
	1.1,1,2,2-Tetrachloroethane CAS 79-34-5	Продавец: Yufeng International Group Co., Ltd	Product Description Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Te...