Chain Oil Additive
Chain Oil AdditiveT6012 High-temperature Chain Oil Additive PackageProduct Introduction T6012 is an excellent ashless additive package which is developed for high-temperature chain lubricant oil. It is made from high temperature antioxidant composition, anti-wear composition, anti-rust and corrosion inhibitor and other additive composition .It can be used for the blending of high-quality and high-temperature chain oil, which has excellent high temperature stability, low evaporation loss, low carbon deposition and coking tendency as well as excellent lubricating properties at high temperature. It does not produce any harmful gases, also can reduce the downtime for cleaning accumulated solids to keep the chain clean. Reference dosage ItemAdviceVariety of petroleum products and dosagesMineral oil-based high-temperature chain oil 2.4%（m）Polyester type high-temperature chain oil 1.8%（m）The synthetic ester type high-temperature chain oil 1.2%（m）Base oil typeAPI I, II, III, IV, V group or their mixture, which should be based on the requirements of environment and temperature for useOther additivesNo need in generalBlending temperature for petroleum products≤ 65 ℃ SpecificationItemTypical ValueTest MethodAppearanceOrange transparent liquidVisualFlash Point(COC),℃215 ℃GB/T267Kinematic Viscosity（40℃）,mm2/sReportGB/T265Density（20℃）,g/cm3ReportGB/T1884Nitrogen,%, m1.68SH/T0224Phosphorus,%, m1.51SH/T0296TBN,mg KOH/g52.5SH/T0251Packing & Storage The storage temperature suggested should be lower than 50℃, and the highest temperature of loading, unloading and blending should not exceed 60℃. This product should be operated as SH/T0164 during the storage, loading and unloading and oil blending. It is non-flammable, non-explosive and non-corrosive. In terms of safety, environmental protection and application, it is the same as general petroleum products, there is no need for special protection. The product is packed in 200 liter metal drum or other packing methods conforming to user requirements.
Другие товары поставщика
|
|
|
T6004-1 Quenching Oil Additive Package
T6004-1 is formulated with a variety of additives, such as efficient rush cold agent ,antioxidant, bright... |
|
|
|
oil film bearing oil lubricant additiveT5014C Oil Film Bearing Oil Additive PackageProduct Introduction T5014C is a kind of ashless additive packag... |
|
|
|
Minglan Chemical is one of the leading sm sn engine oil additive manufacturers and suppliers offering customized sm sn engine oil additive, welcome... |
|
|
|
molybdenumT2011 The non sulfur phosphorus molybdenumProduct introduction Molybdenum has good anti-wear, antifriction, oxidation resistance, no corr... |
|
|
|
adding additives to engine oilT6033 CD Diesel Engine Oil Additive PackageProduct IntroductionExtend the service life of engine; saving fuel oil;Pre... |
Все товары поставщика
Похожие товары
