Direct Burial Cable/Wire HALAR And HMWPE For Cathodic Protection
HALAR/HMWPE cable is designed for anode lead wires in a wide range of environments.
One of the major causes of deep anode failures is the failure of cable insulation. This is especially evident in areas where brackish water is present in the ground. In this environment, anodes generate reactive gases such as chlorine and na-cent oxygen. These gases cause rapid deterioration of conventional HMWPE insulation.
Cathodic protection cable insulated with HALAR fluoropolymer, is especially suited for deep anode lead wires. HALAR fluoropolymer is inert to reactive compounds and has an outstanding ability to prevent the passage of gases. Laboratory
and field evaluations indicate that HALAR fluoropolymer insulated lead wire can extend the life of deep anode installations. The cable is composed of stranded copper wire covered by two layers of insulation. The outer insulation layer is made from high molecular weight polyethylene (HMWPE). It exhibits superior dielectric and tensile strength, and provides mechanical protection to the cable.
The material is also resistant to water intrusion and is not affected by most organic or inorganic substances. The inner or primary insulation is composed of HALAR, a fluoropolymer. This insulating material demonstrates exceptional chemical
resistance. In the presence of chlorine, hydrochloric acid, sulfuric acid, or other strong oxidizing agents the material remains stable. Further, it will not deteriorate when exposed to petroleum hydrocarbons which are encountered in numerous cathodic protection applications.
The dual extrusion HALAR cable is made specifically for cathodic protection applications. It can withstand considerable abuse during installation.
Другие товары поставщика
|
|
China OEM Portable/Welding Reference Electrode Manufacturers/Suppliers |
They are suit for soil and seawater engineering, fully consistent with the national standard GB / T7387-1999 " The Technology Of Marine Reference E... |
|
|
China OEM Mixed Metal Oxide/MMO Wire/Reticulum Anode Manufacturers For Boiler |
1.Specifications (1) Product: MMO Wire Anode (2) Material: Titanium Grade 1;Mixed Metal Oxide coating; (3) Finish: Rolling,Thermal treatment,Elelec... |
|
|
Extruded Magnesium Anode Rod for Boiler Manufacturers |
Extruded Magnesium Anodes are usually used in a small diameter anodes requirement, such as for water heaters, boilers, water storage tanks, heat pl... |
|
|
China OEM Magnesium Alloy Welding Wire Manufacturers |
We produced welding wire following GB/T 5153 standard, with good welding performance.Grade and Specification of current products: AZ31B Φ1.2mm、... |
|
|
China OEM Zinc Ribbon/ Zinc Ingot/Zinc Alloy Anode Manufacturers/ Suppliers |
Zinc ribbon anodes are used in cathodic protection on buried pipelines, above ground storage tanks, and other CP systems. Deyuan produces Zn ribbon... |
Все товары поставщика
Похожие товары
