Oil viscosity reducer STD-1
Oil viscosity reducer STD-1 contains surfactants, which can effectively reduce the viscosity of oil, improve thermal efficiency, and reduce power loss. This additive has good thermal stability and strong water resistance. It dissolves in aromatic and aliphatic hydrocarbons and does not contain halogens and heavy metal elements.
Properties
This additive has a brown or yellow oily liquid appearance and is irritating to the human body.
Uses
This additive is mainly used to reduce the viscosity of raw materials, quench oil and refinery residue oil of ethylene units, reduce power loss, and extend the operating life of equipment.
Precautions
1. The injection point must be based on the requirements of the system viscosity reduction to ensure that the additive and the process medium are fully mixed when entering the equipment;
2. The general injection concentration is 1~10mg/kg (based on the circulation volume of quench oil). 8mg/kg can be injected first, run for several days, and then gradually reduced to 5mg/kg, observe the effect, and determine the best injection concentration;
3. This additive can be continuously and evenly injected at room temperature or on-site temperature with a metering pump. If necessary, it can also be diluted with a solvent to a certain concentration of solution before use.
Packaging
This additive is packaged in a plastic-lined iron barrel or plastic barrel with a net weight of 170±0.5kg.
Safety protection
Store in a cool and low temperature place, avoid contact with fire or heat sources. In case of fire, use dry powder or carbon dioxide fire extinguisher to extinguish the fire.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Polyester based powder coating MT-MA220G White | Product Description MT-MA220G is a polyester based powder coating, formulated without TGIC and is designed for exterior exposure offering excellen... |
 |
Dopamine hydrochloride | CAS Number: 62-31-7 Molecular Formula: C8H12ClNO2 Molecular Weight: 189.64 Appearance: White or grayish white crystalline powder Melting Point:... |
 |
Automotive components powder coatings MT-A1230/MT-EN155G /MT-PE 55-9403 | Product Description MT-A1230 series covers a wide range of powder coatings specifically designed to meet the extreme demands of automotive compone... |
 |
4,4'-oxydiphthalic Anhydride(ODPA) CAS 1823-59-2 | Introduction 4.4 '-oxybis-phthalic anhydride is a white to white powder organic substance that can be used to make polyimide resins. Application 4... |
 |
Polyester powder coatings for indoor applications with antimicrobial technology MT-310 AM | Product description MT-310 is a series of polyester resin based thermo-setting powder coatings, without TGIC with specific antimicrobial activity.... |
