BM1K Solid Colors (Basecoat Colors)
BM1K Solid Colors (Basecoat Colors)
Auto Coatings Manufacturers
Product Name/Model：BM1K Solid Colors (Basecoat Colors)
Characteristic:BM1K Solid Colorwith excellent leveling property,easy construction,excellentadhesion power and coveraging power,can match all kinds of solid colors, metallic and pearleffect. Mainly applies to intermediate cars, MPV and bus.
|
Well-Sanded, Completely dried and good existing finishes as bellow:A original paint B. Old paint firm C. 1K or2k primer |
|
|
Wash by warm soap, remove wax, silicon and other contaminations withdegreaser, sanding with P800-P1000, wash with clean water then keep dry;again with degreaser. |
|
|
BM1k Solid Colors |
Thinner |
|
1 |
1 |
|
BM1k Solid Colors |
BYTX-1 Fast Thinner |
|
BM1k Solid Colors |
BYTX-2 Standard Thinner |
|
BM1k Solid Colors |
BYTX-3 Slow Thinner |
|
14-16s to drop off, in 4# viscosity cup at 25°C, |
|
|
After spray, allow 10-20 minutes air-drying time,then spray clear coat at once. |
|
|
Gravity Feed: 1.2-1.5mm 3-5kg/cm 2Suction Feed: 1.4-1.6mm 3-5kg/cm 2 |
|
|
Coats&Thickness: 2-3 coats, total 15-20um.Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends ontemperature and paint film. |
|
|
2 years in original sealed can, cool and dry place at 25℃. |
|
|
1L×12or3.75L×4 |
|
Note:1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner toavoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.3. To avolid problems of mottlingorpoor adhesion, the metallic paint film should be 15-25um.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
MSD-0912 1K Binder and MSD-0920 Flip Controller | MSD-0912 1K Binder andMSD-0920 Flip Controller Automotive Refinish Coatings Product Name/Model:MSD-0912 1K Binder andMSD-0920 Flip Controller ... |
 |
MSD-0960 Thinner SRA | MSD-0960 Thinner SRA Automotive Coatings Manufacturer Product Name/Model:MSD-0960 Thinner SRA Characteristic: An additive helps to achieve an invi... |
 |
BYT Clear Coat Series | BYT Clear Coat Series Auto Coatings Product Name/Model：BYT Clear Coat Series Characteristic:1、 BYT518 Clear Coat ：Two- component 518 clear coat wi... |
 |
BYT160-1K Binder / BYT4530-Flip Controller | BYT160-1K Binder /BYT4530-Flip Controller BOYET Series Product Name/Model:BYT160-1K Binder /BYT4530-Flip Controller Characteristic:BYT160-1K bin... |
 |
BYTF609-Matting Agent | BYTF609-Matting Agent. Automotive Coatings China Product Name/Model;BYTF609-Matting Agent. Characteristic: Used to reduce the brightness of pa... |
Похожие товары
 |
Parchment Paper Supplier | Продавец: Brightime Global Limited | Parchment Paper Supplier Parchment Paper , also known as baking paper, is a versatile kit... |
 |
Metallic flat high gloss MT-049/98010 | Продавец: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating | Продавец: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating | Продавец: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | Продавец: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
