MF Clear Coat Series
3、MF Clear Coat Series
Automotive Paint company
Product Name/Model:MF Clear Coat Series
Characteristic:1.MF880- 8000Clear Coat :Two- component 880 clear coat with super-high density and solid,deep rich gloss, high hardness, excellent weathering and chemical resistance. Applies tosenior cars, suitable for overall refinish, quality and performance compare favourably withmany imported clear Coats2.MF580- 5000Clear Coat:Two-component fast drying 5000 clear coat with excellent gloss,high hardness, excellent weathering and chemical resistance.3.MF380- 3000Clear Coat:High gloss 380 clear coat, with high richness, good levellingproperty, easy construction, high hardness, excellent chemical and weathering resitance. Bepaint film in lower temperature. Application in Medium, Senior car, MPV, Bus.4.MF280- 2000Clear Coat:High gloss and high hardness two-component 280 clear coat, easyconstruction, fast dry, good pretective power and weathering resistance, save cost and timeduring refinish.Application in standard car, construction machinery.
|
Substrates |
1K Basecoat. |
||||
|
Mixing Ratio |
Clear Coat |
Hardener |
Thinner |
||
|
2 |
1 |
||||
|
＜15℃ |
Clear Coat |
Mating Fast Hardener |
60 Fast Thinner |
||
|
15-30℃ |
Clear Coat |
Mating Standard Hardener |
61 Standard Thinner |
||
|
＞30℃ |
Clear Coat |
Mating Slow Hardener |
62 Slow Thinner |
||
|
SprayViscosity |
16-19s to drop off, in 4# viscosity cup at 25°C, |
||||
|
Pot-Life |
At 25℃4 hours with fast hardener.4 hours with standard hardenerorslow hardener. |
||||
|
Re-Treatment |
There are particlesorruns after spray, sand affected area with P2000 sand paperafter thorough drying, then polish to solve the problem. |
||||
|
Spray GunSet Up |
Gravity Feed: 1.2-1.5mm 4-5kg/cm ²Suction Feed: 1.4-1.6mm 4-5kg/cm ² |
||||
|
SprayTechnology |
Coats&Thickness: 2-3 coats, total 25-35umFlash-Off Time: At 25°C, 5-10 minutes between two coats,Air-Drying Time: Allow 10-15 minutes air drying time before force drying |
||||
|
Drying Time |
Temperature |
Dust Free |
Tack Free |
Dry to Handle |
Dry to Test |
|
25°C |
30 minutes |
2 hours |
8 hours |
6 days |
|
|
70°C |
5 minutes |
10 minutes |
25 minutes |
60 minutes |
|
|
Shelf Life |
2 years in original sealed can, cool and dry place at 20℃. |
||||
|
Package |
5L×4or2.5L×8or5L+2.5L+1L |
||||
Note:1. At temperature lower than 15°C, air-dry at ambient temperature is not recommended. Better toallow a full bake at 60°C.2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner toavoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.3. The products mixed with hardener should be used up soon and can not be restore for future use;clean equipments immediately with thinner after application, otherwise it is very difficult tobe cleaned after dry.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
MSD-0930 2K Binder | MSD-0930 2K Binder Automotive Refinish Paint Product Name/Model:MSD-0930 2K Binder Characteristic:Resin solution used as additive for spraying M... |
 |
BYTF600-Plastic Primer | Auto Coatings Product Name/Model：BYTF600-Plastic Primer Characteristic: Single-component transparent fast drying primer, used to promote adhesion... |
 |
BYT100-2K Binder | BYT100-2K Binder BOYET Series Product Name/Model:BYT100-2K Binder Characteristic:Resin solution used as additive for spraying BM2K Solid Color... |
 |
BM1K Solid Colors (Basecoat Colors) | BM1K Solid Colors (Basecoat Colors) Auto Coatings Manufacturers Product Name/Model：BM1K Solid Colors (Basecoat Colors) Characteristic:BM1K Sol... |
 |
BYTF606-2K Primer Surfacer | Auto Coatings Product Name/Model：BYTF606-2K Primer Surfacer Characteristic: Multi-purpose two-component 2K Primer Surfacer with strong filling pow... |
