Hollow & Bushing Insulator

• 

We offer different kinds of Hollow & Bushing Insulator for Substation, such as Circuit Breaker (CB), GIS, Post Insulator, Disconnector, Potential Transformer (PT), Surge Arrester, etc.

Contact us get more details about Hollow & Bushing Insulator, such as TDS, Application Method, OEM etc.

We can supply different type of Hollow & Bushing Insulator, also customer required.

Background technique of Hollow & Bushing Insulator

Arcing, corona, etc. occur in the device or the end of the hollow core composite sleeve, and the high temperature generated directly acts on the inner wall of the epoxy layer. Or the plasma generated by the arc and the corrosive gas generated by the decomposition of SF6 in the circuit breaker may impinge on the inner wall of the exposed epoxy layer. Polyethylene oxide itself has high temperature ablation resistance, arc resistance and corona resistance, and may cause severe surface ablation and leakage. Therefore, it is necessary to improve the arc resistance of the Hollow & Bushing Insulator.

In the existing science and technology, the fluoroplastic tube is sheathed in the polyethylene oxide/glass fiber composite pipe, thereby utilizing the arc resistance of the fluoroplastic to prevent arc, corona and the like from damaging the inner wall of the hollow composite pipe. However, in this way, its flexibility is poor, the pipe wall is thick, the production is difficult, and the cost is high.

Introduction of Hollow Core Insulators:

Hollow & Bushing Insulator plays an important role in insulation, support, etc. in outdoor power stations, substation and electrical equipment, or as a component of electrical equipment for power equipment. It is usually made of glass fiber hollow-wound tube, upper and lower flanges and silicone rubber shed, which provides support and insulation for wires and electrical equipment, or acts as external insulation for electric equipment, bearing external forces such as bending and stretching.

Structure of Hollow & Bushing Insulator:

The Hollow & Bushing Insulatorconsists of an insulated mandrel inner cylinder, a tip flange, and a silicone rubber umbrella sleeve. The silicone rubber umbrella sleeve is formed by connecting two or more silicone rubber umbrella sleeve segments, and the connection structure between the adjacent two silicone rubber umbrella sleeve segments is a stepped lap joint structure, which increases the lap joint area. When the silicone rubber umbrella sleeve is subjected to the axial tensile force, the joint strength between the two mold umbrella sleeves is strengthened, the electrical performance of the hollow composite insulator is ensured, and the service life is prolonged.

Ruisenproduces rtv silicone coating,ceramic transformer insulator,hollow porcelain insulator,transformer bushing insulator,hollow insulatorand ceramic bushing insulators,contact us now.

Другие товары поставщика

	K11 Flexible Waterproof Coating	Fujian RuiSenNew Materials Co., Ltd. was established in 2007, located in Fujian Province, China. RuiSen is the largest manufacturer of RTV Silicone...
	Electric Cleaning Agent	Electric Cleaning Agent is mainly used for eradicating dirt, dust, and contaminations on the power equipment surface especially clean those which s...
	Line Post Insulator	We can offer different Voltage of Line Post Insulatorfor Transmission Line. Such as Long Rod Insulator, Rod Insulator and Pin Type Insulator. Cont...
	Silicone Rubber Shield for Porcelain Insulators	Silicone Rubber Shield for Porcelain Insulatorscan used to protect the 10-35kV overhead power line insulators (such as pin porcelain insulator, cap...
	Multifunctional Insulator Cleaning Agent RS-10	The Characteristics of silicone electrical insulationProduct Since silicone rubber has high bond energy and good chemical stability, its heat resi...

Похожие товары

	Metallic flat high gloss MT-049/98010	Продавец: Standard International Group (HK) Limited	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co...
	Pure epoxy powder coating	Продавец: Standard International Group (HK) Limited	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist...
	Epoxy polyester powder coating	Продавец: Standard International Group (HK) Limited	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc...
	Pure polyester weather-resistant powder coating Factory Supplier	Продавец: Standard International Group (HK) Limited	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris...
	Metallic flat semi-gloss Powder Coating MT-049/97003	Продавец: Standard International Group (HK) Limited	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co...