Architectural aluminum powder coating MT-D34
WA：+86 132 6275 2056
WEB: std-coatings.com
Product Description
MT-D34 is a series of durable powder coatings specially formulated for the use on architectural aluminum which conforms to the performance requirements of GB5237.4 specification. MT- D34 is designed to offer significantly high gloss retention and resistance to color change combined with maximum film integrity to ensure long term cosmetic and functional protection. MT-D34 powder coatings are available in a selected range of colors including pearlescent effects in gloss, satin and matte finishes. Fine and coarse textured are also available.
Powder Properties
| Chemical Type | Polyester |
| Appearance | Smooth |
| Particle Size | Suitable for electrostatic spray |
| Specific Gravity | 1.3 - 1.7 g/cm³ |
| Gloss | 45 – 55% (depending on color) |
| Storage | Dry, cool conditions (open boxes must be resealed) |
| Shelf Life | 12 months below 25°C peak temperature 6 months below 30°C peak temperature |
|
Stoving Conditions (at object temperature) |
10 minutes at 200°C Failure to observe the curing conditions may cause differences in color, gloss, and/or the deterioration of the coating properties. |
Mechanical Tests
|
Adhesion |
GB/T 9286 | Pass Gt0 |
| Erichsen cupping | GB/T 9753 | Pass, 5 mm no crack or detachment of film |
| Impact resistance | GB/T 20624.2 | Pass, 50 InP Reverse, deformation no crack |
| Bend Test | GB/T 6742 | Pass, 3 mm no crack |
Pre-treatment
For maximum protection it is essential to pretreat components prior to the application of MT- D34. Aluminium components should receive the following pre-treatment in accordance of supplier's recommendation.
Substrate
Aluminum - Multi-stage chrome chromate or chrome phosphate Galvanised.
Steel - Multi-stage zinc phosphate or chromate.
Steel - Multi-stage zinc or iron phosphate.
Application
MT-D34 powders can be applied by manual or automatic electrostatic spray equipment. It is recommended that for consistent application and appearance product be fluidized during application. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.
Types of powder coating
Powder coatings can be categorized by resin system (epoxy, polyester, hybrid, polyurethane), appearance (smooth, texture, hammer, metallic, pearlescent), or performance level (anti-corrosion, heat-resistant, UV-resistant, architectural grade, automotive grade).
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Antimicrobial Powder Coatings | Introduction Product SegmentationApplication Fields Antimicrobial Powder Coating Medical devices, laboratory workbenches, etc. ... |
 |
High-performance corrosion protection powder coating | High-performance powder coatings for corrosion protection. MT’s primer product portfolio is designed to provide high corrosion resistance fo... |
|
|
High durability powder coatings MT-800 AM | Product Description MT-800 AM is a series of high durability powder coatings designed for exterior exposure. Tested against the most severe specif... |
 |
Flat matte MT-629/62179 | Introduction No. MT-629/62179 Color Brown Surface Flat matte System Super weather-resistant polyester Scope of a... |
 |
Villa Elevator Powder Coating | Introduction Aesthetic and Functional Excellence: The coating provides an aesthetically pleasing and uniform finish with excellent weather resista... |
Похожие товары
 |
Powder coatings for automotive interior parts MT-A2201/MT-YN203GF | Продавец: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT-A2201 powders can be used ... |
 |
Powder coatings for Automotive trim parts MT-A2201/MT-YN218GF / | Продавец: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT-A2201 powders can be used ... |
 |
Powder coatings for Automotive trim parts MT-A2201 /MT-YZ108GF | Продавец: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT- A2201 clearcoats can be u... |
 |
Powder coatings for Automotive trim parts MT-A2201/MT-YZ204I | Продавец: Standard International Group (HK) Limited | Product Description MT- A2201 clearcoats can be used for pillars and appliqués, roof rack... |
 |
Basecoat powder coating MT-A2204/MT-MW188I | Продавец: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT-A2204 basecoat comes in an... |
