Powder coating primer containing zinc MT-PZ ALZ44TH
WA：+86 132 6275 2056
WEB: std-coatings.com
Product Overview
MT-PZ ALZ44TH is a high-performance zinc-rich epoxy powder coating primer engineered to deliver superior corrosion protection for mild steel structures. This duplex system combines the benefits ofcathodic protectionandbarrier effect, ensuring both long-term corrosion resistance and structural integrity. The formulation incorporates a highly conductive epoxy zinc-rich base that enhances cathodic protection, while built-in anticorrosive agents improve scratch resistance and maintain protection even in case of minor surface damage. MT-PZ ALZ44TH is designed to be over-coated with compatible industrial topcoats, enabling its use in multi-layer protective coating systems for harsh industrial environments.
Powder Properties
| Property | Specification | Details |
|---|---|---|
| Chemical Type | Thermosetting Epoxy | Epoxy resin-based, zinc-rich formulation |
| Appearance | Smooth | Fine, uniform powder suitable for electrostatic application |
| Color | Grey | Approx. RAL 7012 |
| Recommended Film Thickness | 70–120 µm | Ensures optimal corrosion protection |
| Density | 2.9 ± 0.03 g/cm³ | Provides a consistent coating weight per unit area |
| Application | Electrostatic spraying | Corona method recommended; tribo application not advised |
| Storage | Dry, cool (≤30°C) | Avoid moisture and direct sunlight; maintain packaging integrity |
| Shelf Life | ≥12 months | When stored under recommended conditions |
Surface Pretreatment Guidelines
Proper substrate preparation is critical for optimal adhesion and corrosion resistance. Pretreatment recommendations for MT-PZ ALZ44TH include:
| Substrate | Mechanical Pretreatment | Chemical Pretreatment |
|---|---|---|
| Mild Steel | Grit Blasting Sa 2.5 per ISO 8501-1. Rz 35–60 µm, Ra 6–12 µm | Degreasing & phosphating or equivalent; surface must be dry and free of contaminants |
| Cast Steel | Not recommended | Not recommended |
| Electro Zinc Steel | Not recommended | Not recommended |
| Hot-Dip Galvanized Steel | Not recommended | Not recommended |
| Zinc-Sprayed (Gas Flame/Electrical Deposition) | Not recommended | Not recommended |
Note:Surface preparation is mandatory to achieve full cathodic protection and coating performance. Avoid applying MT-PZ ALZ44TH on substrates outside these recommendations.
Application Guidelines
MT-PZ ALZ44TH is optimized forcorona electrostatic powder spraying. Tribo application is not recommended due to potential adhesion issues.
Recommended Equipment Settings:
Fluidizing Air Pressure: Start at 1.5 kg/cm², then reduce to 1.0 kg/cm²
Transport Air Pressure: 0.5–0.8 kg/cm²
Voltage: 65–70 kV
Curing Guidelines:
Ensure the primer is fully cured or at least gelled before topcoat application.
Object temperature: 110–180°C
Use a convection oven; optional infra-red heaters are acceptable.
Air temperature in the oven must not exceed 180°C.
Recommended Film Thickness: 70–120 µm — critical for optimal barrier and cathodic protection.
Recycling Notes:
Conduct trials with recycling equipment before production.
Maintain a minimum of 70% new powder in the recycling mix.
Clean gun nozzles every 30 minutes to avoid clogging and ensure consistent coverage.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Transfer printing powder coatings | Introduction Transfer printing powder coatings are advanced decorative coatings that allow for the application of intricate patterns and designs o... |
 |
Sand-Textured 3D Wood Grain Powder | Introduction Sand-textured 3D wood grain powder is a specialized coating that replicates natural wood texture with a sandy, matte finish and a thr... |
 |
Conventional powder coatings | WA：+86 132 6275 2056 WEB: std-coatings.com Introduction Conventional powder coatings are positioned in the mid-to-high-end market, with raw ma... |
 |
Acrylonitrile butadiene styrene/polycarbonate (ABS/PC) | Technical Data Flammability Value TestMethod Flame Rating UL94.IEC .-20 1.0 mm, ALL V-0 1.5 mm, ALL V-0 2.0 m... |
 |
STD TBSI | Product Introduction: Chemical Name: N-tert-butyl-bis(2-benzothiazole)sulfonyl imide CAS Registration Number: 3741-80-8 Product Specifications: ... |
Похожие товары
 |
Powder coating primer MT-Active EL140N | Продавец: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT-Active is a powder coating... |
 |
Powder coating primer MT-Active EL193N | Продавец: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Product Overview MT-Active is a powder coating pr... |
 |
Powder coating primer MT-Active EL193N | Продавец: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Product Overview MT-Active is a powder coating pr... |
|
|
Powder coating primer containing zinc MT-PZ ALZ44TH | Продавец: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Product Overview MT-PZ ALZ44TH is a high-performa... |
 |
Powder coating primer containing zinc MT-PZ ALZ55N | Продавец: Standard International Group (HK) Limited | WA：+86 132 6275 2056 WEB: std-coatings.com Product Overview MT-PZ ALZ55N is a high-performan... |
