Antistatic powder coating

• 

Getaquote

whats/app：+86 132 6275 2056

WEB: std-coatings.com

Introduction

Introduction:

Made of antistatic materials, suitable for indoor and outdoor environments

Features:

The volume resistivity of the coating is as low as 106-1010 Ω· cm, which prevents the accumulation of static electricity on the surface of the equipment and protects the equipment.

It can resist static electricity for a long time.

Use:Suitable for coating and protection of the surface of electrical appliances and equipment to reduce static electricity accumulation.

Application parameters:

Curing time:200℃×10–15 minutes

Spraying method:High voltage electrostatic spraying 60-80 KV

Recommended film thickness:60-80 um

Physical properties:

The above tests all use 0.8mm degreased and derusted cold-rolled steel plates, with a coating thickness of 40 to 80um. The performance indicators of the coating will vary slightly with the gloss.

This product does not contain heavy metals such as arsenic, selenium, lead, hexavalent chromium, mercury, antimony, cadmium, etc., and meets RoHS requirements.

Storage conditions:Store in a dry, ventilated room at around 25°C, avoid direct sunlight. Under this condition, the powder can be stored for 6-12 months. If it is overdue, it can be re-tested and can still be used if the results meet the requirements.

Note:The test indicators mentioned in this report are all data obtained from laboratory tests and are for reference only, not as a performance commitment for product application. The results may vary depending on environmental factors and other conditions.

Другие товары поставщика

	Tricresyl Phosphate STD-T306	Introduction Reference dosage: 0.5-3.0 (mass fraction) / % Quality standard: Appearance ​Clear oily liquid Color (Pt-...
	Thermosetting flat powder coating	Product Introduction MT thermosetting flat powder coating adopts advanced polymer formula technology to form a dense and smooth coating through hi...
	Polyester-Epoxy Powder Coating	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product Introduction: This series of products is a thermosetting powder coating mad...
	Micaceous iron oxide Portafer AP65	Introduction Micaceous iron oxide (Fe2O3) is a naturally occurring iron oxide with a layered structure similar to mica (hence the name). Features...
	1,3-Propane sultone CAS 1120-71-4	WA：+86 132 6275 2056 WEB: std-coatings.com 1.3-Propane sultone (1.3-PS), also known as 1.3-propanesultone or 1.3-propane sulfone inner ester, i...

Похожие товары

	Metallic flat high gloss MT-049/98010	Продавец: Standard International Group (HK) Limited	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co...
	Pure epoxy powder coating	Продавец: Standard International Group (HK) Limited	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist...
	Epoxy polyester powder coating	Продавец: Standard International Group (HK) Limited	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc...
	Pure polyester weather-resistant powder coating Factory Supplier	Продавец: Standard International Group (HK) Limited	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris...
	Metallic flat semi-gloss Powder Coating MT-049/97003	Продавец: Standard International Group (HK) Limited	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co...