Non Modified Cellulose Ether

• 

Non Modified Cellulose Ether

To improve the workability properties of Portland cement and gypsum based dry mortars, such as plaster, render, tile adhesive and EIFS mortar.

Non Modified Cellulose Ether could also be able to provide good workability, stable air content and good water retention for the mortars. If there are a “R” , it means a surface treatment that allows for retardant dissolving.If better workability or good anti-slip is necessary, Non Modified Cellulose Ether can be combined with other additives.

Non Modified Cellulose Ether is non-perishable product. It is recommended to use the products in rotating on a first in first out basis. The products should be stored under dry and clean conditions in its original packaging and away from heat.The products are hydroscopic. The packaging is selected in a way to avoid ingress of moisture, but the water content of the packed product will / may increase if not stored dry.

Product safety

According to the EU legislation on dangerous substances and preparations, Non Modified Cellulose Ether is not hazardous. Further data on the safety aspects of Non Modified Cellulose Ether types are given in the Safety Data Sheets.

Customer notice and Disclaimer

The products and related information provided by MT are for manufacturing use only. MT makes no express, implied, or other representation, warranty, or guarantee concerning (I) the handling, use, or application of such products, whether alone, in combination with other products, or otherwise, (II) the completeness, definitiveness, or adequacy of such information for user’s or other purpose, (III) the quality of such products, except that such products are of MT’s standard quality. Users are advised to make their own tests to determine the safety and suitability of each such product combination for their own purpose. Read and understand the Material Safety Data Sheet (MSDS) before using this product. MT does not recommend any use of its products that would violate ant patent or other rights.

Другие товары поставщика

	CAS 54914-85-1 EGTE 1,2-Bis(3-methylphenoxy)ethane	Introduction CAS:54914-85-1, 54914-85-1 – Names and Identifiers Name 1,2-Bis-(3-methyl-phenoxy)ethane Synonyms F-203(EGTE)1,2...
	CAS 80-08-0 4,4′-Diaminodiphenylsulfone	Introduction CAS:80-08-0, 80-08-0 – Names and Identifiers Name 4-Aminophenyl sulfone Synonyms DDSEPORALDapsone4,4′-DDS ...
	CAS 127-63-9  Diphenyl sulfone s-127	Introduction CAS:127-63-9, 127-63-9 – Names and Identifiers Name Phenyl sulfone Synonyms s-97s-127DifenylsulfonphenylsulPheny...
	CAS 2417-04-1 4,4′-dihydroxy-3,3′,5,5′-tetramethyl-biphenyl TMDE	Introduction 2417-04-1 – Names and Identifiers Name 4,4′-dihydroxy-3,3′,5,5′-tetramethyl-biphenyl Synonyms T...
	Fully Methylated Melamine-Formaldehyde Resin	Introduction Fully Methylated Melamine-Formaldehyde Resin (FMMF): Overview and Key Properties CategoryDetails Chemical Type Hexametho...

Похожие товары

	Epoxy/Polyester Powder Coatings	Продавец: Standard International Group (HK) Limited	Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ...
	Polyester Clear Powder Coatings	Продавец: Standard International Group (HK) Limited	This series of product are made of polyester resin (as hardener) and highly transparentmaterials....
	Acrylic Clear Powder Coatings	Продавец: Standard International Group (HK) Limited	Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar...
	Polyurethane Powder Coatings	Продавец: Standard International Group (HK) Limited	Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ...
	MDF Powder Coating	Продавец: Standard International Group (HK) Limited	Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are...