Polyurethane based powder coating White
Product Description
MT-PA020G is a polyurethane based powder coating, formulated without TGIC and is designed for exterior exposure offering excellent light and weather resistance from a single coat finish.
Powder Properties
| Chemical type | Polyurethane |
| Appearance | Smooth Matt |
| Particle Size | Suitable for electrostatic spray |
| Specific gravity | 1.74 ± 0.05 g/cm³ |
| Film Thickness | 75 – 100 microns |
| Coverage | 7.7 ㎡/kg @ 75 microns |
| Storage | Dry cool conditions below 25°C (open boxes must be resealed) |
| Shelf life | 12 months |
|
Stoving schedule (object temperature) |
15 – 20 minutes @ 205°C |
Test Conditions
The results shown below are based on mechanical and chemical tests which (unless otherwise indicated) have been carried out under laboratory conditions and are given for guidance only. Actual product performance will depend upon the circumstances under which the product is used.
| Substrate | Cold Rolled Steel |
| Pretreatment | B1000 Iron phosphate |
| Film Thickness | 75 – 100 microns |
| Stoving Schedule | 15 minutes at 205°C |
Mechanical Tests
| test | results | |
| Flexibility | ASTM D522 | 12 mm |
| Adhesion | ASTM D3359 | 100% |
| Impact (direct) | ASTM D2794 | 60 kgcm |
| Gloss(@60°） | ISO 2813 | 85 ± 5 |
| Hardness(scratch) | ASTM D3363 | 2H |
| Reflectance Class | DIN EN 16268 | A |
Pre-treatment
Steel surfaces to be coated must be clean and free from grease, mill scale and rust. For maximum protection, it is essential to pre-treat components prior to the application of MT-PA020G. Iron phosphate and zinc phosphate pre-treatment of ferrous substrates improve corrosion resistance. Aluminium substrates may require a chromate conversion coating.
Application
MT-PA020G can be applied using manual or automatic electrostatic spray equipment. It is recommended, that for consistent application and appearance, the product be fluidized during application. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
4-acryloylmorpholine CAS 5117-12-4 | Introduction CAS NO. 5117-12-4Molecular formula: C7H11NOAppearance: Colorless or pale yellow transparent liquidContent: 98%minColor code: 30APHA m... |
 |
Polyester based powder coating | Product Description MT-OA110G is a polyester based powder coating, formulated without TGIC. Powder Properties Chemical type Polyester TGI... |
 |
CAS 793-24-8 6PPD (4020) N-1,3-dimethylbutyl-N’-phenyl-p-phenylenediamine | Introduction Chemical Name :N-(1,3-Dimethylbutyl)-N’-phenyl-p-phenylenediamine CAS NO. :793-24-8 Product Specification: Appearance ... |
 |
Dimethyl Lauryl/myristyl Amine CAS 84649-84-3 | Introduction Chemical Name Dimethyl Lauryl/myristyl Amine Product Category Fatty Tertiary Amine CAS No. 84649-84-3 Content... |
 |
Butylated Urea Formaldehyde Resin | Introduction Butylated Urea-Formaldehyde Resin(BUF) is a modified product of urea-formaldehyde resin (synthesized by the polycondensation of urea ... |
Похожие товары
 |
Epoxy/Polyester Powder Coatings | Продавец: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | Продавец: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | Продавец: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
 |
Polyurethane Powder Coatings | Продавец: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | Продавец: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
