RHS Post Welded Mesh Fence
RHS post is mainly used on twin wire panel fence, it is also used on welded mesh fence as an economic choice. The panel is the normal welded mesh panel with curve and spikes, the finish is electrostatic spray or PVC dipped coating. Only the post is different, we use rectangular section post, and we use galvanized then do electrostatic spray.Standard color:Features: •Easy Installation•Cost effective•Nice looking•Different options on color according to the using environment•Strong anti rust and anti corrosion abilityApplication: factory and workshops, garden, public buildings, government, schools, parks and playgrounds, sport stadium, roads and railways, villa.Technical:Panel Width :2.50m, 2.75m, 3.0m Height:1.23, 1.53, 1.73, 2.03, 2.23, 2.43, 3.03mMesh:50x200mm, 50x150mm, 50x100mmWire thickness:4.0mm,4.5mm,5.0mmRigid V:2, 3, 3, 4, 4, 4, 6Finish:PRE-EDG+PP, PRE-HDG+PP, PRE-GALFAN+PP, HDG, HDG+PPNos. of brackets2, 3, 3, 4, 4, 4, 6Post Section :RHS Section size:40x60, 60x80mmHeight:According to the panel heightWall thickness:1.5/2.0/2.5 mmFinish:PRE-HDG+PP, HDG, HDG+PPAccessories:•1pcs of post plastic rain hats•Plastic Clamps with bolts and nuts•Metal clamps with bolts and nuts Packing:Mesh panels: Metal pallet wrapped with cardboard plate and then wrapped with plastic filmPost: Wrapped with PP bags, then put on pallet, wrapped with plastic film;Accessories: Cardboard box;Customized packing is available.
Другие товары поставщика
|
|
|
Roll-top fence for square post, in fact the mesh panel is almost same with theStandard color:Features:•Easy Installation•Nice looking•Different opt... |
|
|
|
R50 picket fence formed of relatively thin-walled rectangular cross-sectioned tubular-steel posts, 50x50mm rails and pickets. Tubular picket fence ... |
|
|
|
Sliding gate single type Technical:Opening:4.0m, 6.0m, 8.0mHeight :1.8m, 2.0m, 2.4m Infilled:Chain link mesh, panel mesh, tubular, W or D section p... |
|
|
|
The mesh panel is the simple fence Panel. We use good quality low carbon steel wire or galvanized wire do the welding, then make several curves bas... |
|
|
|
Welded ripper razor mesh is welded by razor wire, and the mesh hole is diamond, the mesh size should be 75x150mm, or 150x300mm. The mesh height is ... |
Все товары поставщика
Похожие товары
