W0850T fish type obdurability
then, will need to enter the line pipe lines each thread cut to about 5 cm, take a piece of bare wire into the threader head small hole circle fold and firm, with several lines need to enter the same line pipe, and ground them in together, wrapped with tape from the line pipe slowly in the past, the most, on the other end pull the threader. Note: when you pull hard, need to tap the line pipe.
Другие товары поставщика
|
|
W0830 fish type three braid |
1.Strong: maximum tensile damage coefficient under 700 kg (please don't exceed 700 kg, in order to avoid broken wire damage body), security departm... |
|
|
hand grinder, lifting and traction |
Powered winches are the construction tools of erecting electric circuits of high pressure electric transmission in the sky and laying eletrical cab... |
|
|
Cheap Battery power cable cutter for Cu/Al cablearmoured cable EZ-85 |
Li-ion batteriesdo neither have a memory effect nor self-discharge. Even after long periods of non operationthe tool is always ready to operate. In... |
|
|
DP011-10 cable jacks |
Trapezoidal wire laying frame, commonly known as "cable support" for placement of cable tray, overhead wires or cables, adopts a hydraulic device, ... |
|
|
Hot sales Cable Drum Dispenser Cable Reel Drum 1ton |
DP026-4: Rated Load-4T, application of disc width-2200mm, weight-55kg DP026-6: Rated Load-6T, application of disc width-1800mm, weight-65kg DP026... |
Все товары поставщика
Похожие товары