Winding machine, conveyor, trailer
The use of ground grinding security technology
(1) the ground should be put on the flat, accessibility, and fixed tightly, prevent the ground plane to move or skewed.
(2) run one end of the rope to lower by grinding core pulling, and suction clockwise around the core grinding, the other end by the upper half of the grinding core leads.
(3) ran to the derivation of the rope should be guide pulley, may not directly lead to high.
(4) discover the rope phenomenon, immediately stop, manage their ropes rear can continue to promote ground grinding work.
(5) ground on the ground should be equipped with prevent grind core reverse braking mechanism, prevent the core grinding reverse cuts.
(6) ground when stop running, brake should be good, and will run the rope and pull on the rope on the lock, the operator can leave.
(7) many operation shall have a clear division of responsibilities, personal command, the same action, it is forbidden to irrelevant personnel stay in run on either side of the rope and pulled tight rope.
Другие товары поставщика
|
|
Multi-roller manufacture |
note: 1 Protect the conductor and pulling rope at wellhead bus-bar. 2 Leaning against the side of pithead directly while using. Used at the end of... |
|
|
hydraulic lifting jacks |
Application: Suitable for cable tray support. Hydraulic lifting, casters at the bottom, easy to move. For line construction, extending wire shelvi... |
|
|
Electrical Technician insulating rodder |
Fiberglass duct rodder is an auxiliary tool applied in towing lead-rope through a pipe. The rod surface is hard and smooth, so it can get through t... |
|
|
usability Cobra Conduit Rod |
Duct rodder/ Cobra Conduit Rod is composed of fiberglass rod which is extruded by fiber glass rod and high strength resin at high temperature.This ... |
|
|
SD-1000C Multi function wire grip |
ModelNo.
Rated Load(KN)
Range of application(mm)
Weight(KG)
SD-1000C
10
Power transmission and distribution of 2.6-15steel strand... |
Все товары поставщика
Похожие товары
