erection of wire
The use of ground grinding security technology
(1) the ground should be put on the flat, accessibility, and fixed tightly, prevent the ground plane to move or skewed.
(2) run one end of the rope to lower by grinding core pulling, and suction clockwise around the core grinding, the other end by the upper half of the grinding core leads.
(3) ran to the derivation of the rope should be guide pulley, may not directly lead to high.
(4) discover the rope phenomenon, immediately stop, manage their ropes rear can continue to promote ground grinding work.
(5) ground on the ground should be equipped with prevent grind core reverse braking mechanism, prevent the core grinding reverse cuts.
(6) ground when stop running, brake should be good, and will run the rope and pull on the rope on the lock, the operator can leave.
(7) many operation shall have a clear division of responsibilities, personal command, the same action, it is forbidden to irrelevant personnel stay in run on either side of the rope and pulled tight rope.
Другие товары поставщика
|
tractor cable winch, cable puller for sale |
Uses: applicable to field construction traction hoisting machinery equipment and electric power, post and telecommunication line group made tower, ... |
|
NEW- 10mm x 490' Duct Rodder Fish Tape |
Common features as below: 1. Strong non-conductive fiberglass rod construction. 2. Every Metre Marking for Easy use. 3. Yellow Color for better ... |
|
Cable roller SH450 |
note: 1 Protect the conductor and pulling rope at wellhead bus-bar. 2 Leaning against the side of pithead directly while using. Used at the end of... |
|
S-3000CL all purpose wire grip |
Wire mesh cable grip is power, telecommunications, railway electrification of overhead line construction and maintenance tools commonly used in the... |
|
cable wire device |
Constructed of fiberglass reinforced in the center and consists of a rugged plastic layer that would ensure the lifetime of the flexible rod. Assem... |
Все товары поставщика
Похожие товары