.

MIL-DTL-83513 Micro D Connectors

Description:

By its very design, the Micro-D connector system meets all the requirements of robustness, durability, low contact resistance, high current, dielectric strength, shock, and vibration. With 1.27 mm (.050") contact spacing, Micro-D connectors, half the size of D-sub connectors, represent an excellent solution for saving both space and weight. In addition to a complete range of Micro-D connectors to MIL-DTL-83513, Sunkye' also offers Micro-D PCB connectors and cable assemblies in both metal and plastic bodied versions. With its many possible configurations, Micro-D technology is perfectly suited to a multitude of systems where weight, miniaturization or signal transmission integrity is paramount: applications benefiting from this technology include everything from missiles and their guidance systems, through oil well drilling tools to medical devices, satellites, and scientific research. For very specific applications such as medical MRI scanners or low magnetic field detection systems, Sunkye' has developed a range of non-magnetic connectors using new materials and surface treatments, avoiding ferromagnetic materials. Hermetic connectors are also offered for applications where an enclosure needs to be fully sealed from the outside world.

The Twist Pin contact by its design and performance enables the system to meet the most severe requirements – often significantly more so than stipulated in the MIL-DTL-83513 and MIL-DTL-32139 standards. The male Micro-D contact is made up of 10 strands of beryllium-copper and copper alloy twisted together, welded then bumped. These sprung strands are in fact compressed during insertion into the turned female contact and therefore a high number of electrical contact points are permanently assured while retaining flexibility and ease of insertion/ extraction. The bulged point will be compressed inside the socket during insertion. Insertion and retention performance of the twist pin and socket mated pair. Both socket contact chamfer and twist pin hemispherical radius contribute to ensuring adequate insertion even in case of misalignment.

Range of Micro-D 83513 micro d connectorswhich is covered by the MIL-DTL-83513* standard is ideally suited to equipment and applications where weight, miniaturization and long term performance are required. It is available:

- In 10 contact arrangements (9 to 100 contacts) for rectangular Micro-D connectors.

MIL dtl 83513 specification

CHARACTERISTIC

SPECIFICATION

TEST METHOD

CURRENT RATING

3 A max.

EIA-364-70

CONTACT RESISTANCE

10 mΩmax.

EIA-364-06

INSULATION RESISTANCE

5000 MΩmin.@ 500 Vdc

EIA-364-21

DIELECTRIC WITHSTANDING VOLTAGE

600 Vac

EIA-364-20

- SEA LEVEL 0 m

150 Vac

- ALTITUDE 21 km (70,000 ft)

CONTACT ENGAGING AND

170 g max.(6 oz)

EIA-364-37

SEPARATION FORCE

14 g min (0.5 oz)

CONNECTOR MATING AND

283 g (10 oz) x number of contacts max.

EIA-364-13

DE-MATING FORCE

CONTACT RETENTION

EIA-364-29

DURABILITY

500 mating cycles min.

EIA-364-09

TEMPERATURE RANGES

- STANDARD

-55°C / +125°C

- HIGH TEMP

-55°C / +200°C

VIBRATION

10Hz-2000Hz,196m/s²

EIA-364-28 - TEST CONDITION IV

SHOCK

735m/s² 11ms

EIA-364-27 - TEST CONDITION E

SALT SPRAY

48 hours

EIA-364-26 - TEST CONDITION B

HUMIDITY

Insulation resistance > 1MΩ

EIA-364-31 - METHOD IV

As a specialist in advanced military connectors china, Sunkyehas extensive experience in micro-miniature and nano miniature solutions based on the highly reliable Twist Pin contact technology. If you want to know more details or want a quotation , just feel free to contact us!



Отправить запрос, связаться с поставщиком

Кому: SUNKYE INTERNATIONAL CO., LTD.
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

SUNKYE FIRING HEAD CONNECTOR FOR PERFORATING GUN EQUIPMENT
SUNKYE FIRING HEAD CONNECTOR FOR PERFORATING GUN EQUIPMENT Sunkye produced head connectorhas dual high pressure 138Mpa (20,000PSI) benefit with glass sintered sealing (the air leakage rate: 1x10-3Pa.CM³...
Sunkye High Temperature & High Pressure HTHP Connector Series
Sunkye High Temperature & High Pressure HTHP Connector Series The high temperature electrical connectorsand high pressure electrical connectorsare designed to support the signal transmission of high voltage ra...
Twist Pin Connectors
Twist Pin Connectors Description: The Twist Pin contact by its design and performance enables the system to meet the most severe requirements – often significantl...
Nano Horizontal Mounted Crimp Connector
Nano Horizontal Mounted Crimp Connector Nano Horizontal Mounted Crimp Connector for Choice Description of Nano Horizontal Mounted Crimp Connector SunkyeNano Horizontal Mounted Crimp C...
MICRO RIGHT ANGLE PCB CONNECTOR D-SUB TYPE
MICRO RIGHT ANGLE PCB CONNECTOR D-SUB TYPE The right angle board to board connector features gold-plated BeCu Twist Pin contacts for best performance. Sunkye Micro D-sub right angle PCB con...
Все товары поставщика

Похожие товары

BioHub Aseptic Connector & Disconnector
BioHub Aseptic Connector & Disconnector Продавец: 百林科 Bio-Link Single-use solutions are increasingly being used in bioprocessing production. For single-use biop...
Conductive System Quick Connector End Cap
Conductive System Quick Connector End Cap Продавец: Zhejiang Huaqi Information Technology Co., LTD plasticquickconnect.com/product/quick-connector/conductive-system-quick-connector/conductive-syst...
Energy Storage Plug Connector
Energy Storage Plug Connector Продавец: Aupins Technology Co., Ltd AUPINS new energy storage connector conforms to the global quality standards. Our storage plug in...
Energy Storage Socket Connector
Energy Storage Socket Connector Продавец: Aupins Technology Co., Ltd Energy Storage Connector The connector for energy storage module equipment developed by AP is ab...
Electric Bike Charging Cable
Electric Bike Charging Cable Продавец: Aupins Technology Co., Ltd The appearance of electric bike charging cableconnects to the popularity of E bikes. E-bikes are ...