Dry magnetic-bias arc suppression coil
The operating principle of the arc suppression coil compensation device is to compensate the difference between the inductor current flowing through the fault point and the capacitive current by 180 degrees. After the compensation, the fault current flowing through the fault point is less than 5A, thus reducing the power system's occurrence due to the single-phase intermittent arc grounding.
Другие товары поставщика
|
|
improve voltage reduce losses high-voltage shunt Capacitor bank-TBB |
Mainly consists of high-voltage shunt capacitors (C), series reactors (L), zinc oxide arresters (FV), discharge coils (TV), disconnectors (QS), pos... |
|
|
reduce harmonics low active loss fast response speed Magnetic-valve Controllable Reactor MCR-type SVC |
MCR (Magnetic-valve Controllable Reactor) Type SVC MCR type SVC uses self-coupling DC excitation and limiting magnetic saturation work mode, which ... |
|
|
achieve automatic group switching Shunt Capacitor bank automatic compensation-TBBZ |
Mainly by the TRZ controller, vacuum contactors, high-voltage shunt capacitors, series reactors, fuses (or internal fuses), zinc oxide arresters, d... |
|
|
strengthen transmission high voltage and dynamic Cubicle-type SVG |
SVG(Static Var Generator), also referred to as STATCOM (Static Synchronous Compensator) is a modern static var compensator using self-commutation c... |
|
|
Thyristor Controlled Reactor TCR-type SVC Chinese manufacturer |
TCR (Thyristor Controlled Reactor) Type SVC The TCR type SVC device is mainly composed of TCR (thyristor control reactor) and FC (filter capacitor ... |
Все товары поставщика
Похожие товары
