.

4rb 610-0ah16-8 Side Channel Blower/Vacuum Pump

Greentech International (Zhangqiu) Co., Ltd is the professional side channel blower supplier.
The impellers in the G_series machines are mounted directly on the motor shaft for noncontact compression entirely without friction. Maximum operational reliability, even at high differential pressures. Is ensured by the arrangement of the bearings outside the compression chamber.
The gas it taken in through the inlet. As it enters the side channel, the rotating impeller. Imparts velocity to the gas in the direction of rotation. Centrifugal force in the imp eller blades accelerates the gas outward and the pressure increase. Every rotation adds kinetic energy. Resulting in the further increase of the pressure along the side channel. The side channel narrow at the rotor, sweeping the gas off the impeller blades and discharging it through the outlet silencer where it exits the side channel blower.
Features:
1. Beautiful surface
2. Easy installation
3. Low noise level
4. No vibration, and therefore complete dynamic stability
5. Pulsation-free discharge
6. Minimal maintenance
7. Higher pressure ratio
8. Cooler running bearings
9. Longer grease life
10. Simple maintenance
11.100%oil-free air
12. Suitable for environmental protection
13. Small dimensions
14 continuous duty


Отправить запрос, связаться с поставщиком

Кому: Greentech International (Zhangqiu) Co., Ltd
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

2BV2 070 Water Ring Vacuum Pump for Mine
2BV2 070 Water Ring Vacuum Pump for Mine 2BV2 070 Water Ring Vacuum Pump for Mine2BV series liquidring vacuum pumps are suitable for pumping the gases and steam. Its suction pressure can r...
2RB 710-7AA11 Side Channel Blower
2RB 710-7AA11 Side Channel Blower Greentech International (Zhangqiu) Co., Ltd is the professional side channel blower supplier.The impellers in the G_series machines are mounted dir...
Lz200 Air Suspension Centrifugal Blower/Centrifugal Fan
Lz200 Air Suspension Centrifugal Blower/Centrifugal Fan Air Suspension Bearing:Air suspension bearings use air buoyancy instead of lubricating oil, and use the surrounding air instead of lubricating oil,...
4rb 620-0ah36-8 Side Channel Blower/Regenerative Blower/Air Compressor
4rb 620-0ah36-8 Side Channel Blower/Regenerative Blower/Air Compressor Greentech International (Zhangqiu) Co., Ltd is the professional side channel blower supplier.The impellers in the G_series machines are mounted dir...
Nsrh65 Air Cooling/Tri-Lobe Roots Blower/Air Blower
Nsrh65 Air Cooling/Tri-Lobe Roots Blower/Air Blower Features of SeriesNSRHTri-Lobe Roots Blower: 1. Each model has a performance table and standard specification, easy to select fan model;2 Includin...
Все товары поставщика

Похожие товары

Side Channel Blower (2RB210 ring blower)
Side Channel Blower (2RB210 ring blower) Продавец: Greentech Industry (Jinan) Co., Ltd Features:1. Beautiful surface2. Easy installation3. Low noise level4. No vibration, and therefore...
Tri-Lobe Roots Blower (NSRH) / Air Blower / Vacuum Pump.
Tri-Lobe Roots Blower (NSRH) / Air Blower / Vacuum Pump. Продавец: Greentech Industry (Jinan) Co., Ltd Application:Mainly used in sewage treatment (aeration), powder conveyor (cement, feed, etc. ), co...
M8026 Roots Blower/Air Pump/Blower/USA Tech Air Cooling.
M8026 Roots Blower/Air Pump/Blower/USA Tech Air Cooling. Продавец: Greentech Industry (Jinan) Co., Ltd Greentech International (Zhangqiu) Co., Ltdis the professional roots blower supplier. Series M Ro...
Lt100 Roots Blower Positive Pressure Suitable for Industrial Heavy-Duty Applications
Lt100 Roots Blower Positive Pressure Suitable for Industrial Heavy-Duty Applications Продавец: Greentech Industry (Jinan) Co., Ltd Three lobes blowers are new series roots type blowers. By cnc machinewe made precise rotors to pr...
Lt Series Roots Blower/Three Lobes Reduce Vibrationand Noise!
Lt Series Roots Blower/Three Lobes Reduce Vibrationand Noise! Продавец: Greentech Industry (Jinan) Co., Ltd Three lobes blowers are new series roots type blowers. By cnc machinewe made precise rotors to pr...