Floating Differential Pressure Control
FP74E pressure differential control is usually used in the water system of central conditioning. It controls the pressure difference between water supply pipe and return pipe.FP74E pressure differential control is equipped with a single-pole double-throw floating-point contact. The movement of floating-point will connect the contact plate to open or close the operating valve of motor drive.One typical application is to mount the valve on the by-pass line near the system s water pump. When the pressure difference between the system s feeding and return pipes is over the set value of the controller,Website:, the valve turns up and more water will flow through the by-pass valve and hereby reduces the pressure difference between feeding and return pipes. On the opposite, the pressure differential will increase between these two pipes of the water system.Floating Differential Pressure Control Technical dataAdjusting data 0.05→0.4 MpaSwitch differential 0.014 MPaAwitch contact capacity 50Hz，AC220V 6A;DC24V 4AContact action SPDT (Floating point)Download：FP74E Differential Pressure Control
Другие товары поставщика
|
|
|
MP45-Series Micro pressure control is an electrical switch controlled by pressure signal.It s affected by the discharge pressure of the compressor.... |
|
|
|
SSV series two-way bi-flow solenoid valves are mainly used for the defrosting of wind cooling heat pump refrigeration unit and the defrosting of su... |
|
|
|
WTV series temperature responsive expansion valves(liquid injection) are usually installed suction side of compressorin refrigeration system to pro... |
|
|
|
TDC differential temperature control-is designed to use the differential temperature between two bulbs,Website:, when there is temperature differen... |
|
|
|
WTV series temperature responsive expansion valves (liquid injection) are usually installed suction side of compressor in refrigeration system to p... |
Все товары поставщика
Похожие товары
