Self- Support 3 Legged Angular Tower
Communication Towers are usually built on the ground,Website: field , rooftop, strong bearing capacity of the wind. Angle Steel are main material used in towerstructures, including some steel plates and tubes. The structures can be also composed by steel tube only. Each section of the tower frame shall be connected by fasten bolts and nuts. All tower structures shall be hot dipped galvanized after fabrication. Angle Steel Tower shall be composed by tower boots, tower body, lightning rod, platform, climbing ladder, antennas brackets, feeder panel and lightning deflectors.
Tower and Mast Accessories
In addition to lattice towers and masts we supply all the galvanized hardware required for the assembly of these support structures. The hardware supplied is in compliance with the engineering specifications.
Accessories include:
●Aircraft warning light
●Lighting rod
●Rest and working platforms
●Ladders and cages
●Cable ladders
●Earthing straps
●Guy attachments
●Specialized antennae brackets etc.
Terms
Detail
Height
5-100Meter
Wind Pressure
0-300 KM/H
Details & Shape
Mono pole, single pole ,triangular pole,square 4 legged, tubular or lattice type or combined
Material
Q345B/A572, minimum yield strength >=345MPA; Q235B/A36, minimum yield strength>=235MPA
Surface treatment
Hot dip galvanized as ASTM A- 123, color polyester power ,painting or any other standard by client required.
Design
We can design free of charge if Qty is numerous, client should supply the design parameters.
Standards
ISO 9001
Welding
Submerged arc welding , internal and external double welding makes the welding seam beautiful in shapeWelding Standard :AWS ( American Welding Society ) D 1.1
Working & Resting Platform Quantity
1-3 PCS
Antenna Support
3-18 PCS
Microwave Dish
3-18 PCS
Spare parts
All Necessary parts, e.g. Antenna Mount pole and Brackets , Climbing Steps, Safety Guide Cable tray,ladder, Lightning Rod, Mounting bracket for Obstruction light, Holding down bolts/nuts, and all other bolt and nuts required for erection and installation
Другие товары поставщика
|
|
|
Components of Transmission Line Product Details :1. Voltage: 10KV-750KV 2. Material: Q345B/ASTM A572 Gr50,Website:, Q235B/ASTM A36, Q420B/ASTM ... |
|
|
|
Our communications pole is designed and manufactured for durability,Website:, wear and corrosion resistance, and visual appeal. We begin with the h... |
|
|
|
Derrick type stacks are one type of support system for an elevated flare. The elevated flare tip is mounted on top of a riser supported by a steel ... |
|
|
|
Conical Steel Pole The conical steel pole also called tapered pole. It can be octagonal or 12sides .
1. Voltage range: 10KV-750KV 2. Materia... |
|
|
|
High Voltage Power Transmission Line Tower: Transmission towers support the high-voltage conductors of overhead power lines,Website:, from the gene... |
Все товары поставщика
Похожие товары
