.

Latch Type Hall Sensor AH3075

Latch Type Hall SensorAH3075

Hall Sensor

Hall Switch

Features

Rated working voltage 4.5 V ~ 24 V, the limit voltages as low as 3.5 V;

Operating temperature range: -55℃ ~ 150℃;

Rated output current(sink) : 25 mA, the maximum output current(sink): 50 mA;

Switch response time is about 1μs, the operating frequency DC ~ 100 kHz;

Small temperature drift between operating point and release point;

No mechanical contact, no spark, switch signal stability, no shaking moment, high reliability and safety;

Products meet the EU RoHS instruction 2011/65 / EU and REACH regulations 1907/2006 / EU requirements.

Hall sensor AH3075 is one of bipolar excitation single-ended digital output Hall IC. The output signal owns latch function. The sensor chip has built-in reverse voltage protection, voltage regulators, temperature compensation circuit, Hall-voltage generator, signal amplifier, Schmitt trigger, and open collector output driver circuit unit. Excellent voltage regulator and temperature compensation circuit ensure the sensor stable operates over a wide voltage range and temperature range, and the reverse voltage protection circuit avoids the sensor to be damaged by reverse voltage.


Отправить запрос, связаться с поставщиком

Кому: Nanjing AH Electronic Science & Technology Co., Ltd.
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

AH49E - магнитоуправляемая микросхема на основе датчика Холла
AH49E - магнитоуправляемая микросхема на основе датчика Холла Linear Hall Sensor AH49E Hall Sensor Hall Switch Features Rated working voltage 4.5 V ~ 6.5 V;   Operating temperature range: -40℃ ~ 125℃; Rail to ...
Micropower Omnipolar Hall Sensor AH3661
Micropower Omnipolar Hall Sensor AH3661 Micropower Omnipolar Hall SensorAH3661 Hall Sensor Hall Switch Features Micropower designing; Rated supply voltage 2.4 V ~ 5.5 V; Omnipolar operati...
Signal-Type Wiegand Sensor WG311
Signal-Type Wiegand Sensor WG311 WG311 ◆Features No need the power supply when it works. Bipolar excitation working mode, the sensor outputs a pair of positive and negative ...
датчика Холла AH496B
датчика Холла AH496B Linear Hall Sensor AH496B Hall Sensor Hall Switch Features Rated working voltage 4.5 V ~ 10 V;,   Operating temperature range: -40℃ ~ 125℃; Rail to...
Latch type Hall Sensor AH513
Latch type Hall Sensor AH513 Featuresof our Rated working voltage 4.5 V ~ 24 V, the limit voltages as low as 3.5 V; Operating temperature range: -55℃ ~ 150℃; Rated output cur...
Все товары поставщика

Похожие товары

China supplier Intelligent protection controller for electric heating HIPC3R power plant spare parts
China supplier Intelligent protection controller for electric heating HIPC3R power plant spare parts Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "China supplier Intelligent protection controller for electric heating HIPC3R power plant spare p...
China manufacturer TriE Conductivity Sensor  for power generation
China manufacturer TriE Conductivity Sensor for power generation Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "China manufacturer TriE Conductivity Sensor for power generation YOYIK is a hi-tech company spe...
China factory conductivity meter LEX2000. 33-6M for power station
China factory conductivity meter LEX2000. 33-6M for power station Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "China factory conductivity meter LEX2000. 33-6M for power station Our company is equipped with h...
China factory LVDT of high and middle note of large turbine DF-4000TDZ-A for power station
China factory LVDT of high and middle note of large turbine DF-4000TDZ-A for power station Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "China factory LVDT of high and middle note of large turbine DF-4000TDZ-A for power station Our c...
China manufacturer Differential pressure transmitter CS-III for power generation
China manufacturer Differential pressure transmitter CS-III for power generation Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "China manufacturer Differential pressure transmitter CS-III for power generation Is to use the g...