Enactus-LL9DJUE Burgmann LL9DJUE Replacement
FeaturesAPI 682 Category 2 and 3,Website:, Type A, Arrangement 2 sealDual seal in face-to-back arrangementDry contact outer seal (containment seal)BalancedCartridge unitStationary multiple springsSolid seal facesAdvantagesOuter seal which can be used for flashing as well as non-flashing applications prevents hazardous emissions in case of inboard seal failureLow heat generation and power consumption due to narrow seal face width of inner sealLonger seal lifeGood followability due to no influence from run-out, squareness or vibration of the shaftPressure-balanced design prevents mating ring being forced out under reverse pressureNo damage to shaft sleeve as dynamicO-Ring is not in direct contact with the sleeveOperating rangeShaft diameter: d1 = 20 ... 110 mm (0.79" ... 4.33")Pressure (primary seal): p = vacuum ... 60 bar (870 PSI)Pressure (secondary seal): p = 2.75 bar (40 PSI) normal operation,max. 60 bar (870 PSI) in wet operationTemperature: -40 °C … +176 °C (-40 °F … +349 °F)*Sliding velocity: ... 25 m/s (82 ft/s)* Engineered up to 260 °C (500 °F) with FFKM (K) secondary seals.MaterialsSeal ring (primary seal): Blister resistant carbon, Silicon carbide SSiC (Q1), RBSiC (Q2)Seal ring (secondary seal): Special carbonMating rings: Silicon carbide SSiC (Q1), RBSiC (Q2)Secondary seals: FKM (V), FFKM (K), EPDM (E), NBR (P)Springs: Hastelloy® C-276 (M5)Metal parts: CrNiMo steel 316 (G)Recommended applicationsRefining technologyOil and gas industryPetrochemical industryChemical industryPower plant technologyLight volatile hydrocarbonsLPG plantsAPI 610 / ISO 13709 pumpsProcess pumpsserviceProvide special designAccording to the requirements and conditions for the custom processing
Другие товары поставщика
|
|
|
FeaturesEquivalent to Burgmann TDGS sealGas-lubricatedUni-directional or bi-directionalElastomer-freeReady-to-fit cartridge unitSingle seal availab... |
|
|
|
Structure Description:Equivalent to AES CURC cartridge sealOperating Limits:Temperature：-20℃ to +210℃Pressure： ≤2.5MPaSpeed： ≤15m/sMaterials:Statio... |
|
|
|
FeaturesSingle sealBalancedIndependent of direction of rotationMultiple springs stationarySeat rotatingSeat arranged directly behind the impellerSp... |
|
|
|
Structure Description:Equivalent to AES M05,Website: Crane Type 9T sealMultiple spring , Unbalanced sealOperating Limits:Temperature:-40---250℃Spee... |
|
|
|
Structure Description:Rubber bellows designEquivalent to John crane type 21/AES P04/AES P04TOperating Limits:Temperature:-40°F to 400°F/-40°C to 20... |
Все товары поставщика
Похожие товары
