resin sand regeneration and molding equipment

Introduction to typical process flow for no-bake sand production The process flow for no-bake sand production is various depending on the workshop layout, process character and production requirement, which usually is made of used-sand reclamation, used-sand crashing and regeneration, used-sand pneumatic pick-up and temperature adjustment, sand transfer and mixing, etc. 1. Used-sand reclamation: Used sand and scattered sand after shaking out in shakeout machine is transferred by conveyor equipment(vibratory conveyor, belt conveyor, bucket elevator, etc) and stored in sand bucket. During the process, the metallic remaining in sand is removed by magnet separation equipment. 2. Used-sand crashing and regeneration: Sand block in sand storeroom is uniformly fed to the breaker by ration vibratory in-feeder, after being crashed and screened( with pre-regeneration function),further reclaims in different reclamation combination devices according to different technology requirement. The reclamation types mainly include impact reclamation, centrifugal and powerful friction reclamation,etc. The required defiling rate can be obtained by various combination according to technological requirements. The reclaimed sand is stored in hot sand funnel. 3. Used-sand pneumatic pickup and temperature adjustment: The hot used sand which contains lot of dust is uniformly spread by sand distributor. And the dust powder is removed by the dedust system after pneumatic pickup device each-step blasting. The used sand after dedust treatment enters in temperature adjustment device and moves downward uniformly and slowly under the flow regulator pan and simultaneously exchange heat with exchanging blade. After the sand being heated to required temperature, it is sent to regeneration funnel to store for future use. So, the reclamation operation of the used sand is accomplished. 4. The wet fresh sand and bag packed sand, after drying from three-time new-sand baking system, is fed into new-sand funnel by pneumatic conveyor for future use. 5. New/used sand ingredient: According to different technological requirement, the new/used sand ingredient can be conveyed after mixing in prescribed proportion or mixed in proportion after the new/used sand are conveyed to the sand funnel on the top of the mixer.

Другие товары поставщика

		China Vibrating Screen Manufacturer&vibratory Feeders,Resin Sand Reclamation Machine
		Fixed Type Vibration Table,Vibration Table
	Shower Type Sand Feeder&sand Adding Machine	Shower Type Sand Feeder&sand Adding Machine,Lost Foam Molding Machine
	lost foam molding equipment for engine block production	Lost foam molding equipment Lost foam casting equipment can be designed to simple or huge whole line. At present, it's widely used in the casting ...
	V process molding line	OPERATING PRINCIPLE vacuum process cast molding is a new metal molding technology and only adopt dry sand (no water, binder, tagger) It's auto...

Похожие товары

	электроизоляционные материалы и запчасти трансформатора	Продавец: Longsper insulation technology(TIANJIN)CO.,LTD	электрокартон бумага с алмазным пунктиром DDP бумага эпоксидный препрег DMD крепированная бума...
	S тип сплава стальной нагрузочный элемент TSC 50kg для силовых измерительных систем loadcell тестер	Продавец: Yixing City Sanwei Electric Manufacturing Co., Ltd.	S тип нагрузки ячейки, напряжение и сжатиеХорошая симметрия вывода, компактная структура, простая...
	Round Rubber Washer	Продавец: Ex-proof Cable Gland, EX Cable Glands, Explosion Proof Products, OEM Cable Gland Supplier & Manufacturer China	O-ring We are Sealing washer supplier For use on cable gland entry threads,which is waterproof an...
	Mo Alloy Powder	Продавец: Shanghai Laiwu Powder Material Co.,Ltd.	Mo Alloy Powder,Pre Alloyed Powder
	Ni-Mo Alloy Powder	Продавец: Shanghai Laiwu Powder Material Co.,Ltd.	Ni-Mo Alloy Powder,Website: Alloyed Powder