PU/PUT 2-Jaw / 3-Jaw Slant-Column Pull Back Draw Down Power Hollow Chuck
(1). PU/PUT hollow slant-column pull back chuck is suitable for machining the workpiece with the requirement of positioning, verticality and parallelism of the end surface. It only needs to change the clamps when different workpieces are installed.
(2). When processing different workpieces, only need to change the soft jaws to use.
(3).Centrifugal force compensation.
(4). Less maintenance, lower wear, long-term stable accuracy, constant clamping force.
(5). Repeat positioning accuracy up to: 0.025mm.
(6). Chuck diameter range: 110-381 mm, 4 to 15 inch
(7). Material: Steel.
(8). Clamp and pull back the workpiece, with a strong clamping force.
Другие товары поставщика
|
|
NHU 45 degrees/90 degrees High-Speed Automatic Quartered Hydraulic Indexing Power Chuck |
(1). Due to the small outer diameter of the chuck, suitable for small CNC lathes. (2). In the work of no loss of grip, the smaller hydraulic pressu... |
|
|
BUE 3-Jaw Pull Back Draw Down Power Chuck for I.D.verticality and parallelism |
(1). BUE I.D. pull back chuck apply for machining verticality and parallelism have the required workpieces, such chuck a wide range of clampings. (... |
|
|
KBL/KBLT 2-Jaw / 3-Jaw Ultra Long Stroke Hydraulic Power Chuck |
(1). KBL / KBLT hydraulic chuck with 6 inch, 8 inch, 10 inch, 12 inch,15 inch,18 inch size and divided into 2- jaw type, 3-jaw type, . (2). Clampin... |
|
|
PUE 3-Jaw Slant-Column Pull Back Draw Down Power Chuck for I.D. |
(1). PUE I.D. slant-column pull back chuck is suitable for machining the workpiece with the requirement of positioning, verticality, concentricity ... |
|
|
PU/PUT 2-Jaw / 3-Jaw Slant-Column Pull Back Draw Down Power Hollow Chuck |
(1). PU/PUT hollow slant-column pull back chuck is suitable for machining the workpiece with the requirement of positioning, verticality and parall... |
Все товары поставщика
Похожие товары
