API Green Due Piston and Wirth Piston
HNA offers a full line of pistons for duplex and triplex mud pumps. All API types are available. Among these are:
• Pistons with replacement rubbers
Our premium pistons are fully interchangeable with other API standard designed pistons and deliver maximum performance in almost all drilling conditions. High tensile strength, resistance to chemicals, hydrocarbons, and abrasion, long lasting service, and full interchangeability with other API designed pistons make our premium piston a sound value.• Bonded Rubber Pistons
This one piece bonded constructed piston has no joints to leak. Eliminates abrasive fluids between piston and liner. The fluid expanded lip is not damaged by high pressure and fast pump strokes. This Fail-Safe piston seals off to greater diameter as liner wears
• Premium Bonded Urethane Pistons Currently running in pumps using exotic muds and highest drilling pressures! Bonded construction - no joints, no leakage. Longer piston and liner life. This piston will run in higher-pressure, fast stroking pumps, and is resistant to oil base muds and other additives currently being used. This Premium Piston has been in service for years, providing unmatched performance under extreme drilling conditions. This one piece bonded unit provides the same series of advantages., being imprevious to oil and other chemicals
HNA also offers a full line of piston replacements including Piston Hubs, Plates, Snap rings and Replacement Rubbers.
The hub is formed from high grade steel.
The piston rubber is made from specially formulated compounds which are resistant to the effects of heat, oil and water. The multi-ply fabric reinforced backings used in the production of the piston rubbers provide positive, wear resistant seals.
Другие товары поставщика
|
|
Haliburton HT-400 Triplex Plunger Pump Fludi End Section |
All our fluid end parts are manufactured to API 7K quality standards. Our API certificate number 7K- 0261.
Parts are available and 100% complete in... |
|
|
Mud Pump Rods&Clamps |
HNA offers Pony Rods, Piston Rods and Clamps to meet today's tough oilfield requirements.
Pony Rods
Our Pony Rods incorporate the longer wearing ... |
|
|
F-1600 Mud Pump Power End Crosshead |
Power End Parts HNA supplies power end parts such as Crank shaft, Pinion shaft, Crosshead, Bull Gear, Pulsation Dampener, Frame and so on for follo... |
|
|
Mud Pump Power End Crank Shaft |
Power End Parts
HNA supplies power end parts such as Crank shaft, Pinion shaft, Crosshead, Bull Gear, Pulsation Dampener, Frame and so on for follo... |
|
|
Буровой насос F-1300 Mud Pump |
Designed and manufactured by HNA Plant, F-1300 and F-1600 mud pumps can meet the requirements of the same manufacturing technique and quality level... |
Все товары поставщика
Похожие товары
