Luminous Afterglow Performance Tester
Luminous Afterglow Performance Tester
The luminous afterglow performance tester is suitable for testing the luminous afterglow performance of various textiles. Fibers, yarns, and powders can all be tested.
Applicable Standards
GB/T 43716 - 2024 Textiles - Test Method for Luminous Afterglow Performance - Photometer Method
Testing Principle
Use the specified light source as the excitation light source. Under the specified illuminance conditions, directly irradiate the sample. After the sample is excited to saturation, remove the excitation light source, and measure the afterglow brightness and decay time on the sample surface through a brightness meter.
Instrument Features
Automatically record the brightness value within the set time through software. Fully automatic measurement, simple operation, capable of long-time measurement, and automatically save data.
Multiple light-shielding designs in the fully enclosed test chamber reduce the influence of external light sources on test results.
Automatically switch test samples. One set of samples can be tested at a time for 3 groups.
Specially made imported sensors with fast sampling speed and high accuracy.
Wide testing range, covering powders, fibers, yarns, fabrics, etc.
Standard Configuration
1 main unit
1 Lenovo integrated computer
1 Lenovo laser printer
3 sample clamps
1 excitation light source
Technical Parameters
Excitation light source: Fluorescent lamp, color temperature (6500 ± 500) K
Brightness meter: 0 - 10000 mcd/m², resolution: 0.01 mcd/cm², accuracy: ±5%
Illuminometer: 0 - 10000 lx, resolution: 0.1 lx, accuracy: ±4%
Approximate weight of the whole machine: 30 kg
Power supply: AC 220V/50Hz
Approximate external dimensions: 375 x 500 x 598 mm (W x D x H)
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
45 Degree Flammability Tester | Standard ASTM D1230: Flammability of Apparel Textiles (45° Inclined Method) CFR 16 Part 1610: Flammability of Clothing Textiles (Federal St... |
 |
Shoe Peeling Strength Tester | |
 |
Car seat static strength tester | Applicable standards: GB 11550-2009"Car seat headrest strength requirements and test methods" : This standard specifies the static strength test r... |
 |
Automatic Wire Stripping Machines | Product Introduction: Automobile wire cutting tester is the main instrument for testing the insulation strength of automobile wire, and it is th... |
 |
Xenotest | Light Fastness Testers | Standard Compliance AATCC TM16-2004 Colorfastness to Light AATCC TM16.3 Colorfastness to Light ASTM D2565 Standard Practice for Xenon Arc Expo... |
Похожие товары
 |
Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением | Продавец: Shandong HUASU Plastic Technology Co.,Ltd. | Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ... |
 |
PanEVAP & MVR system | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
