Fabric Static Stress Resistance Tester

• 

Product Name

Fabric Static Stress Resistance Tester

Applicable Standards

DIN 53860 - 1: Inspection of textiles - Inspection of planar fabric sac-like protrusions - Part 1: Static stress bend tube test method

Application Scope

It is used for testing the elbow static stress deformation of textiles such as woven fabrics or knitted fabrics. The testing instrument includes an elbow fabric static stress resistance tester, an elbow fabric protrusion height measuring instrument, a sample preparation template, etc.

Product Features

1. The frame is made of high-quality aluminum alloy, which is relatively lightweight.

2. Equipped with LED lighting source, with high illuminance, clear imaging and easy identification.

3. Ball joint connection, with low sliding friction and smooth movement.

4. Hinged connection for easy clamping of samples.

5. The measuring arm is made of high-quality non-metallic materials, which is light and easy to operate.

Technical Parameters

1. Angle of the upper test arm relative to the vertical line: 10 degrees

2. Spring stiffness: 149N/M, meeting the standard requirement of 150N/M ± 30N/M

3. Wire diameter: 0.3mm

4. Diameter: 3mm

5. Length of the upper test arm: 250mm

6. Length of the lower test arm: 300mm

7. Connection method: Ball joint connection

8. Lighting source: LED with a power of 20W

9. Projection method: Optical imaging with a resolution of 1mm

10. Measuring arm: Hinged connection for easy clamping of samples

11. Dimensions:

- Static stress experiment part: 600mm×600mm×800mm

- Projection measurement part: 400×600×600mm

12. Power supply: AC220V 50Hz

Другие товары поставщика

	Solar Radiation Meters	Product Introduction: The purpose of this instrument is to measure the temperature change of the sample with radiant heat. Arrange the sample and...
	Safety Helmet Anti-static Tester	Product Introduction: Safety hat anti-static performance tester according to the new national standard GB/T 2812-2006 "Safety hat test Method", GB...
	Automotive Seat Belt Buckle Bending Test Machine-QINSUN	Standard ISO 10195(Seat Belt Anchorage Hardware - Test Methods) ECE R16(Uniform Provisions Concerning the Approval of Safety Belts and Restrain...
	Car seat center of gravity measuring tester	Main parameters: Measuring range:refers to the maximum and minimum range of the center of gravity of the seat that the tester can measure. This ...
	Xenon Arc Weatherometer	IntroductionThe xenon arc lamp, which is capable of simulating the whole natural sunlight spectrum in the most consistent manner, can reproduce t...

Похожие товары

	Air Intake Filter Test System	Продавец: Standard Groups	The Air Intake Filter Test System is designed for testing industrial air filters and engine air f...
	Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging	Продавец: Standard International Group (HK) Limited	The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f...
	Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester	Продавец: Standard International Group (HK) Limited	The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter...
	HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine	Продавец: Standard International Group (HK) Limited	The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ...
	VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine	Продавец: Standard International Group (HK) Limited	The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia...