Civil Aviation Aircraft Interior Non-metallic Materials Flame Retardant Property Tester
Compliance Standards
FAR25.853 (FAA Airworthiness Standards for Transport Category Aircraft)
CCAR-25-R4.853 (Chinese Civil Aviation Regulations Appendix F Part I)
HB5469-2014 (Civil Aircraft Cabin Non-metallic Material Combustion Test Method)
HB5470-2014 (Civil Aircraft Cabin Non-metallic Material Combustion Performance Requirements)
RTCA/DO-160G Section G26.6.2/G26.6.3/G26.6.4 (Environmental Test Procedures)
Applicability Scope
This system applies to combustion performance testing of non-metallic materials in aircraft cabins:
1.1 Crew/Passenger Cabin Areas:
Including ceiling panels, interior walls, partitions, galley structures, cabinet linings, floor coverings, textiles (curtains/coverings), seat cushions, padding, coated fabrics (decorative/non-decorative), leather products, trays/kitchen equipment, electrical conduits, air ducts, joints/edge covers, B/E class cargo compartment linings, B/C/D/E class cargo floor panels, cargo covers, transparent enclosures, molded/thermoformed components, duct joints/edge trims, etc.
1.2 Non-crew/Passenger Cargo Areas:
Insulation blankets, cargo protective covers, tie-down equipment (including containers, ULDs) for each cargo compartment.
Key Performance Parameters
| Parameter Category | Specifications | ||
|---|---|---|---|
| Test Types | Equipment Composition | Combustion Chamber | |
Test Types
Vertical burning test
Horizontal burning test
45° inclination burning test
60° inclination burning test (dedicated chamber)
Equipment Composition
Modular system comprising:
- Combustion chamber
- Control system
- Test fixtures
Combustion Chamber
Multi-functional chamber with shared structure for vertical/horizontal/45° tests
Independent 60° test chamber
Tempered glass observation window (front panel)
Burner System
Bunsen burner configuration:
- Nozzle ID: Ф9.5±0.1mm
- Vapor nozzle: Ф0.9±0.03mm
- Air inlet height: 100±10mm
Dual burners with 0°/45°/60°/90° adjustable angles
Flame height adjustment: 20-100mm (test-dependent)
Timing System
Multi-phase timing (burning/drip flame/smothering phases)
0.1s accuracy with 99.99h max range
Measurement Systems
| Component | Specification |
|---|---|
| Caliper | 1.0mm resolution |
| Thermocouple | K-type, 1.2-1.5mm diameter |
| Temperature Meter | 0-1000°C range, 1°C resolution |
| Stopwatch | 0.1s precision (backup) |
Fixture System
Stainless steel fixtures with orientations:
- Horizontal test frame
- Vertical test frame
- 45°/60° inclined frames
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Textile Bonded Door Drench Tester | I. Product Overview TheTextile Bonded Door Drench Testeris a specialized instrument designed to evaluate the water resistance and durability of te... |
 |
Durability Tester for Automotive Wire Markings | Test Standard: Complies with the ISO19642 standard. Test Method: For the durability tester of automotive wire markings, fix a wire approximate... |
 |
MST clothing pressure tester-QINSUN | Product Introduction The MST Clothing Pressure Tester/Underwear Pressure tester is used in the body or in the laboratory to easily measure the pr... |
 |
Scratch-resistance testing machine | Product Introduction: Low voltage wire and cable scratch-resistance tester for road vehicles is a device used to scratch the insulating surface ... |
 |
Gravel Resistant Impact Tester/Stone chip tester | Standards ASTM D3170: Coating resistance to gravel impingement. ISO 20567: Paints and varnishes – Resistance to stone chipping. SAE J400... |
Похожие товары
 |
Laser Cutting Machines | Продавец: Chanxan (Changshu) Laser Technology Co., Ltd. | Laser Cutting Machines PrecisionLaser Cutting Systemsfor Film, Glass & Industrial Materials ... |
 |
Precision Laser Micromachining Machine | Продавец: Chanxan (Changshu) Laser Technology Co., Ltd. | Precision Laser Micromachining Machine| Ultrafast Laser Micromachining Systems Chanxan provides ... |
 |
Ultrafast Laser Systems | Продавец: Chanxan (Changshu) Laser Technology Co., Ltd. | Ultrafast Laser Systems Femtosecond Laser System Ultra-precision femtosecond laser systemfor hi... |
 |
Industrial Laser Equipment Manufacturer | Продавец: Chanxan (Changshu) Laser Technology Co., Ltd. | Industrial Laser Equipment Manufacturer for Precision Cutting, Marking & Micromachining Chan... |
 |
Common Rail Injector Valve F00R J02 012 | Продавец: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
