Paper water absorption tester

• 

Introduction:

Paper water absorption tester, also known as Kleim test instrument, is suitable for the determination of the capillary suction height of unsized paper and paperboard, and is mostly used in paper manufacturers and quality inspection centers.

Standard:

QB/T1662. GB/T 461.1. ISO8787

Principle:

Take a vertically suspended sample, soak its lower end in human water, measure the capillary suction height after a certain period of time, in order to judge the water absorption of paper or cardboard, suction time according to the characteristics of the product to choose.

Advantages:

Measures Internal Water Absorption: Specifically evaluates capillary water rise, a key property for unsized and absorbent papers.

Standard Compliant (Klemm Method): Operates according to established national and international standards for capillary water absorption testing.

Simultaneous Testing: Capable of testing multiple samples at the same time, improving efficiency.

Simple and Direct Measurement: The test principle and measurement of rise height are straightforward.

Suitable for Quality Control: Provides a reliable method for monitoring the water absorption characteristics of unsized paper and board during production.

Features:

A stand or rack designed to vertically suspend multiple paper strip samples.

A water bath or trough positioned at the base of the stand to immerse the lower end of the samples in water.

Clips or clamps to hold the upper end of the paper samples securely on the stand.

Integrated ruler or scale located alongside the suspended samples for measuring the height of water rise.

Capability to measure a specific number of samples simultaneously (The number of samples measured at the same time: 10).

Includes a specific number of scales (Number of scales: 5), potentially indicating multiple measurement points or duplicate scales for convenience.

Designed for use under specified environmental conditions (temperature and humidity).

Parameters:

Measuring range: 5-200mm

Sample size: 250×15mm

Grading value: 1mm

The number of samples was measured at the same time: 10

Number of scales: 5

Environmental requirements: Temperature: 23±2 ° C, humidity: 50±5%RH

Standard configuration:

Paper water absorption tester host, ruler

Другие товары поставщика

	Thermal Protective Performance Tester (TPP)	The Thermal Protective Performance (TPP) Test Device was developed to measure the time elapsed for convective and radiant heat to penetrate through...
	Manual Vision Measuring Machine	Product Introduction: The manual imager can efficiently detect the outline and surface shape of a variety of complex workpieces, such as: template...
	Impact strength tester for car seat headrest-QINSUN	Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requirements and test methods" : This standard specifie...
	Fogging Tester	Standards DIN 75201: Automotive trim material fogging resistance. ISO 6452: Coated fabrics fogging behavior in vehicle interiors. SAE J1756: A...
	KES - QM Contact Coolness Tester	It is used to measure and evaluate the contact coolness index "q max" (peak heat flux). When the skin comes into contact with fabrics, different am...

Похожие товары

	Blanket Flammability Test Machine	Продавец: Standard Groups	Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ...
	High Temperature Oxygen Index Tester	Продавец: Standard Groups	The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125...
	Limiting Oxygen Index Tester	Продавец: Standard Groups	The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb...
	Vertical Flammability Tester	Продавец: Standard Groups	Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe...
	45 Degree Flammability Tester	Продавец: Standard Groups	Application 45 Degree Flammability Tester is used to determine the burning characteristics of te...