Porton Thermal Manikin Equipment

• 

Product Introduction:

Porton-man was commissioned by the Defense Science and Technology Laboratory (DSTL) to accurately represent military users. This is a state-of-the-art robotic model designed for the UK Armed Forces to test Chemical and biological (CB) protective clothing and equipment.

The porton-man is computer-controlled, and when connected to its drive frame, it can walk like an infantryman, travel (at 0.5 m/s to 1 m/s)， run, sit (at 2 m/s to 3 m/s)， kneel, climb stairs and raise its arms as if seeing a weapon. More than 100 sensors throughout the body can record data during testing, allowing scientists to perform real-time analysis.

Standard：

KSFISO 12949， ASTM E459-22， ISO 12949-2011， ASTM E, ASTM D6616-21， BS 10/30207740 DC, ASTM E, ASTM D4683-25

Capabilities and Simulation:

The porton-man is computer-controlled, and when connected to its drive frame, it can walk like an infantryman, travel (at 0.5 m/s to 1 m/s), run, sit (at 2 m/s to 3 m/s), kneel, climb stairs and raise its arms as if seeing a weapon. This range of motion allows the robot to realistically simulate a variety of infantry movements and tasks, including locomotion at different speeds, changes in posture, and actions involving the upper body. This dynamic capability is crucial for evaluating how protective clothing performs during physical exertion and complex movements, which can impact its protective barrier, thermal comfort, and overall wearability.

Data Acquisition and Analysis:

More than 100 sensors throughout the body can record data during testing, allowing scientists to perform real-time analysis. These numerous sensors likely measure various parameters relevant to the performance of the protective gear and the simulated physiological responses of a human wearer. Data such as temperature, humidity, pressure differentials, and potentially mass transfer or agent penetration can be collected in real-time as the robot performs its movements. This extensive data allows for detailed analysis of the protective system's performance under specific, controlled dynamic conditions.

Key Aspects:

Accurate Human Representation: Designed to replicate the physical characteristics and movement patterns of military personnel.

Specialized for CB Gear Testing: Specifically built to evaluate the effectiveness of protective clothing and equipment against chemical and biological agents.

Dynamic Movement Simulation: Capable of performing a wide range of realistic infantry movements.

Extensive Data Collection: Equipped with over 100 sensors for detailed monitoring during tests.

Real-time Analysis: Enables immediate processing and interpretation of collected data.

State-of-the-Art Technology: Represents a high level of robotic and testing technology.

Main characteristics/Parameters:

Type: Computer-controlled robotic mannequin.

Primary Function: Testing Chemical and Biological (CB) protective clothing and equipment.

Movement Capabilities: Walk, travel, run, sit, kneel, climb stairs, raise arms.

Travel Speed: 0.5 m/s to 1 m/s.

Run/Sit Speed: 2 m/s to 3 m/s (Note: Running speed usually exceeds sitting speed; this might be a typo or refer to specific phases).

Sensor Count: More than 100 sensors throughout the body.

Data Recording: Capable of recording data during testing.

Analysis Capability: Allows for real-time analysis of collected data.

Другие товары поставщика

	Building Materials Combustibility Test Chamber	Building materialsfire resistance testis a very importantandprofessionaltestin safety engineering. The national standard, GB/T8626-2007. specifies ...
	New warm body dummy tester-QINSUN	Product Description In addition to heat dissipation to the surrounding environment through conduction, convection and radiation, the human body al...
	Textile water evaporation rate tester	Standard: The design and operation of this tester are aligned with key international and national standards related to assessing the moisture mana...
	Computer controlled memory impact testing machine	Product Introduction: Computer controlled memory impact testing machine is mainly used for hard plastics, reinforced nylon, glass steel, ceramics,...
	ISO 12103-2 M2 Test Dust	Product Introduction: Particle Technology Fuel Contamination Test Dust offers a full range of fuel contamination test materials used to test the...

Похожие товары

	Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением	Продавец: Shandong HUASU Plastic Technology Co.,Ltd.	Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ...
	PanEVAP & MVR system	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
	PanBox welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...