Swimming goggles sealing tester

• 

Applicable standards:

Seal test equipment for swimming goggles according to ISO 18527-3

Product Introduction:

The tightness of goggles according to ISO 18527-3 and other types of goggles is essential to guarantee their protection against liquids, gases and vapors. Our test equipment is designed according to the requirements of the new ISO 18527-3 standard and facilitates rapid testing during the production process.

Autoclave testing according to EN 14325.

The (air) permeability of fabrics and seams of protective clothing to chemicals after exposure to different stesses is the degree of product performance grade. Our test equipment is designed in accordance with EN 14325 autoclave test methods.

The instrument is used in laboratories and manufacturing facilities for:

Evaluating the watertightness and sealing performance of swimming goggles.

Assessing the effectiveness of the seal against liquids, gases, and vapors.

Quality control during the production process to ensure consistent sealing integrity.

Research and development of new goggle designs and sealing materials.

Ensuring goggles comply with performance and safety standards like ISO 18527-3.

Product Advantages:

Provides a controlled and objective test for evaluating goggle sealing performance.

Essential for guaranteeing protection against liquid, gas, and vapor ingress.

Designed according to the requirements of standards like ISO 18527-3.

Facilitates rapid testing, making it suitable for production line quality control.

Helps ensure consistent sealing integrity across manufactured goggles.

Product Features:

Based on the test type and application:

Standardized test head or fixture designed to replicate the contours of a face for securely mounting the goggles.

System for applying a controlled positive pressure or negative pressure (vacuum) within the sealed volume of the goggles once fitted to the test head.

Pressure or vacuum sensing system to monitor the applied pressure/vacuum level.

Leakage detection mechanism, typically involving monitoring for pressure/vacuum decay over time.

Timer to control the test duration as specified by the standard.

Control system for setting test parameters and indicating pass/fail status.

Другие товары поставщика

	Automotive Wire Scratch Resistance Tester	Standards The tester adheres to global standards for material abrasion testing, including: ISO 6722-1(Road vehicles – Electrical cables &...
	Wire Bending Test Machine	Product Introduction: Wire bending tester meets JIS-C-3005 test standard. The sample is inserted through the specified round hole according to thi...
	MARK-II Slip Resistance Tester	Product Introduction: Paste the cut sample on the test fixture of the portable MARK-II anti-slip testing machine, put down the weight of the rotat...
	Geotextile wear tester	Scope of application: The wear resistance of geotextile and its related products was measured by emery cloth-sliding block method. During the expe...
	Single Cable Vertical Flame Tester	introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a single insulated wire or cable is a bench scale te...

Похожие товары

	High temperature vacum friction & wear tester	Продавец: Standard Groups	High temperature vacuum friction and wear testing machine is mainly used to study the friction an...
	Dry Sand Rubber Wheel Wear Tester	Продавец: Standard Groups	Dry and wet sand abrasive wear testing machine is mainly used to evaluate the wear resistance of ...
	Thrust Washer Friction Testing Machine	Продавец: Standard Groups	The thrust washer friction testing machine is mainly used to simulate the frictional contact of m...
	Electrochemical Corrosion and Wear Testing Machine	Продавец: Standard Groups	Electrochemical corrosion and wear testing machines are widely used in materials science, mechani...
	Metal Angular Fixator Testing Machine	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Metal Angular Fixator Testing Machine...