Automatic Cross-hatch Tester
Product Introduction:
It is a general purpose instrument used to perform a variety of different scratch and scratch resistance tests on paint layers and plastic surfaces. For test plates of different thickness, parallel and cross cutting can be performed with single and multi-row cutting knives. In particular, the adhesion test is carried out according to the cross marking method for all user standards, and the scratch resistance test is carried out according to the GME60 280. A wide range of test parameters and a wide selection of test tools make these tests easy to perform.
Meet the standard:
GM 14688(Method A)， GM 14688(Method B)
PV 3952 public standard, GB 9286-2021
Q/SQR S1-16-2016 Chery standard
Q/SQR T1-64 Chery standard, GME 60 280
GB/T 9286-97/IS0 2409IS02409
GB/T 9279-2007/IS0 1518:1992
QCC SY051-2012
Technical parameters:
Control system: PLC
Size of the test piece (relatively small) : 80x50mm
Sample thickness: 0.5-20mm
Marking path: 0-45mm
Operation interface: Simplified Chinese/English
Size of the test piece (relatively large) : 105mm wide, arbitrary length
Standard load range: 2-50N
Dimensions (W x H x D) : 380x480x760mm
Power supply: 115/230VAC, 50/60Hz(please specify voltage when ordering)
Operation interface: Color 7 inch touch screen, English and Chinese switching, no less than two kinds of voice
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Sewer Pipe Cleaning Machine | For sewer clean，pipe clean, industry tube clean, tank clean, oil removal, ground surface clean. Features: Mobile Design：Very compact machine, eas... |
 |
Geosynthetic direct shear drawing friction tester | The friction characteristics of the interface of sand/geotextile were determined by testing the contact surface of standard sand/geotextile. This i... |
 |
Car seat fatigue tester | Applicable standards: GB/T 18941-2003"Test method of foam polymer materials for car seats" : This standard specifies the test method of foam polym... |
 |
Aerospace Fluorine-containing Wire Dynamic Cutting Through Tester | Applicable standards: GJB773B and other standards in the annex G dynamic cutting test requirements Applicable industry: This instrument is the... |
 |
Friction and wear testing machine | Standards ASTM G99-04 ASTM G77-16 ISO 9352:1995 GB/T 12444-2006 GB/T 12607-2007 GB/T 1865-2009 Application field Petrochemical: Used to ass... |
Похожие товары
 |
Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением | Продавец: Shandong HUASU Plastic Technology Co.,Ltd. | Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ... |
 |
PanEVAP & MVR system | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
