Profilometer
Product Introduction:
The profiler is measured by the slip of the stylus of the instrument and the surface to be measured, and is a contact measurement. Its main advantage is that it can directly measure the surface of some parts that are difficult to measure, such as the surface roughness of holes, slots, etc., and can directly read or describe the shape of the surface contour curve according to some evaluation standard, and the measurement speed is fast, the results are reliable, the operation is easy to measure the plain line shape of various precision machinery parts, straightness, Angle, crown logarithm curve, depth, width and other parameters.
Optional:
The double needle profiler detects the middle diameter of thread, groove diameter and inner diameter.
Standard:
GB/T3505-2000. GB/T6062-2001. GB/T10610-1998. as well as international standards ISO5436. ISO11562. and ISO4287.
Features:
This series of instruments are widely used in machining, motor, auto parts, motorcycle parts, precision hardware, precision tools, tools, molds, optical components and other industries. Applicable to scientific research institutes, universities, metrology institutions and enterprises measuring rooms, workshops. Measuring bearing, needle roller, roller, motor shaft, crankshaft, cylindrical pin, piston pin, piston, valve, valve, gear, oil pump nozzle, hydraulic parts, pneumatic parts, spinning machine accessories, etc.
Parameters:
Measuring range :X direction :100mm, contour measuring range :20mm, 40mm, 60mm
Z-axis operating height :400mm
Minimum measuring hole :25mm
Linear accuracy :±(1.2+10.15H|)um
Arc :±(1.5+R/12)um
Angle :±1'
Straightness :0.5um/100mm
Optical resolution :0.01um
Measurement speed (contour)：0.02mm to 4.0mm/s
Climb Angle: up 77 degrees, down 88 degrees
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Thermal Elongation Tester | Standard IEC 60811-1-1: Electric cables – Thermal elongation tests for insulations and sheaths. ASTM D638: Standard test method for ten... |
 |
Wire Cut - through Tester for Ford Automotive Wires | Applicable Standard: Engineering Specification - Ford Global Wire specification, PART NO. ES - AU5T - 1A348 - AA Technical Parameters: 1. Sens... |
 |
Car seat components strength test bench | Applicable standards: GB 15083：Itspecifies the strength requirements and test methods of the car seat system, which is applicable to the seats and... |
 |
Helmet UV Pretreatment Box Tester | Product Introduction: Helmet ultraviolet pretreatment box is used for helmet ultraviolet irradiation pretreatment, according to the new national s... |
 |
Wire Cut - through Tester for Ford Automotive Wires-QINSUN | Applicable Standard: Engineering Specification - Ford Global Wire specification, PART NO. ES - AU5T - 1A348 - AA Technical Parameters: 1. Sens... |
Похожие товары
 |
Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением | Продавец: Shandong HUASU Plastic Technology Co.,Ltd. | Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ... |
 |
PanEVAP & MVR system | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
