Textile Light and Heat Performance Tester
Product Overview
TheTextile Light and Heat Performance Testeris a multi-functional instrument designed to evaluate textile durability under combined light and thermal stress. It quantifies colorfastness, tensile strength retention, and thermal shrinkage resistance using standardized protocols for apparel, upholstery, and industrial textiles.
Type: Environmental simulation testing chamber
Compliance Standards
ISO 105-B06 (Textile lightfastness)
AATCC 133 (Thermal endurance of carpets)
GB/T 8427 (Colorfastness to artificial light)
EN ISO 105-E04 (Textile colorfastness to perspiration)
Test Methods:
ISO 105-B06 (Lightfastness)
AATCC 133 (Thermal stability)
GB/T 8427 (Colorfastness to light)
Key Metrics:
Color Change ΔE (CIELAB)
Tensile Strength Retention (%)
Thermal Shrinkage Rate (%)
Sample Size: 100×100mm (adjustable clamping)
Key Features
Dual Stress Modes:
Light + Heat:Simulates sunlight + high-temperature environments
Isolated Heat:Evaluates thermal shrinkage independently
Advanced Detection:
UV-Vis spectroscopy (400–700nm color analysis)
AI-based crack detection (5 severity levels)
Real-time thermal imaging (°C gradient mapping)
Automation:
Motorized sample rotation (0–30 RPM)
Programmable multi-stage cycles
Self-cleaning condensate drainage
Applications
Quality Control:Batch testing of outdoor fabrics
R&D:Developing UV-resistant athletic wear
Forensic Analysis:Evaluating garment degradation
Education:Training on textile degradation mechanisms
Standard Operation Workflow:
Sample Preparation: Cut to size, clamp in rotating frame
Parameter Setup: Select light/heat duration (e.g., 72h@80°C)
Testing: Initiate combined stress cycle
Analysis: Generate color loss/thermal deformation curves
Cleaning: Automated decontamination system
Safety Precautions:
Heat-resistant gloves required for sample handling
Use UV-blocking goggles during operation
Maintain 1m clearance from exhaust vents
* ISO 17025-calibrated sensors * Closed-loop cooling system (water-cooled) * NIST-traceable irradiance calibration * Includes 5-year lamp replacement warranty * Stackable design for lab/bench use**Technical Highlights**- ±0.5 ΔE color measurement accuracy (ISO 13994 validated) - 150°C sustained thermal testing - Real-time fabric strain visualization - WiFi/Bluetooth data export to cloud - CE/IECEx certified for explosive atmospheres
Technical Specifications
| Parameter | Specifications |
|---|---|
| Light Source | Xenon arc lamp (1800W, 300–800nm wavelength) |
| Irradiance | 1.12W/m²/nm @ 340nm (ISO 4892) |
| Temperature Range | 20°C–150°C (±1°C) |
| Humidity Control | 30%–90% RH (programmable) |
| Test Duration | 1–999 hours (auto-stop) |
| Power Supply | 380V/50Hz, 5kW |
| Dimensions | 1500×800×1800mm (L×W×H) |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Drum Wrench Series | Drum Wrench Series 20kg Lid Opening Wrench 50 Gallon Drum Wrench 5 Gallon/50 Gallon Dual-Purpose Drum Wrench STD20kg Lid Opening Wrench STD-V ... |
 |
AATCC KMS-M6 Washer, KMS-M6D Dryer-QINSUN | Product Overview TheAATCC KMS-M6 Washer & KMS-M6D Dryerare precision textile testing instruments designed to evaluate fabric durability, col... |
 |
Car seat fatigue tester-QINSUN | Applicable standards: GB/T 18941-2003"Test method of foam polymer materials for car seats" : This standard specifies the test method of foam polym... |
 |
Gravel Resistant Impact Tester/Stone chip tester | Standards ASTM D3170: Coating resistance to gravel impingement. ISO 20567: Paints and varnishes – Resistance to stone chipping. SAE J400... |
 |
Glow wire tester | F242 Glow-wire tester, By simulating the thermal stress caused by heat source or ignition source such as hot component or overload resistor in a sh... |
Похожие товары
 |
Air Intake Filter Test System | Продавец: Standard Groups | The Air Intake Filter Test System is designed for testing industrial air filters and engine air f... |
 |
Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging | Продавец: Standard International Group (HK) Limited | The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f... |
 |
Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester | Продавец: Standard International Group (HK) Limited | The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter... |
 |
HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine | Продавец: Standard International Group (HK) Limited | The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ... |
 |
VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine | Продавец: Standard International Group (HK) Limited | The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia... |
