Fire retardant wood wood stack method burning test equipment

• 

Get a quote：

Whats/App: +86 185 0176 3615

Web: qinsun-lab.com

Email: serving@qinsun-lab。com

Product Introduction:

Fire retardant wood stack method combustion test device is a test device developed and produced by referring to the People's Republic of China public safety industry standard GA/T42.1 "Fire retardant wood combustion performance test method - Wood stack method". MDF-1 type flame retardant wood wood stack combustion test device is suitable for testing the combustion quality loss rate and flame burning time of all kinds of wood with thickness above 20mm in production and engineering after flame retardant impregnation treatment under specified combustion conditions.

Standards:

GB/T 17658-2018

GA/T 42.2-92

ASTM E

ISO 834-1:1999

EN 1363-1:2012

Working conditions:

1. Ambient temperature: room temperature —— 35oC

2. Ambient humidity: ≤70%

3. working voltage: AC 220±10V

4. gas source: natural gas, liquefied petroleum gas

5. timing accuracy: 3min±GA/T 42.1 Flame retardant wood burning performance test method wood stack method 0.1s

6. temperature error: 310oC≤±10oC

Specimen preparation:

1. The specimen size is 76mm×13mm×13mm, the cutting error is ±1mm, and the surface is required to be smooth and flat. Three sets of 24 pieces were prepared for each test piece.

2. The specimen is cut 0.6mm away from the longitudinal end of the wood, less than 1m long wood, and cut from the middle to both sides.

3. the specimen cut from the upper and lower sides of the width of the wood along the thickness direction parallel cut 13mm×13mm test piece two layers, and then cut 76mm along the length direction of the test piece, the remaining center part is not sampled.

4. before the test, the specimen must be at a temperature of 23±2oC, relative humidity (50±5) % of the condition, so that its quality is constant. The determination condition is the interval of 24h, the mass change of two weighing before and after each group is not more than 1%.

Другие товары поставщика

	Thermal - Cold Cycle Testing Machine	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Thermal-Cold Cycle Testing Machine is a professional equipment used for high a...
	Medical glove water-impermeability tester	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The impermeability tester for medical gloves is mainly used to determine the imper...
	ICI Mace Snag Tester | ASTM ISO Testing Machine	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The ICI Mace Snag Tester is a laboratory device used to evaluate the tendency of f...
	Safety Harness Test Rubber Dummy	Get a quote： Web: qinsun-lab.com Email：serving@qinsun-lab。com The safety harness test dummy is used for dynamic load, overall static load, and o...
	Catheter Flexibility Tester	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The catheter flexibility tester is mainly used to evaluate the flexibility and dur...

Похожие товары

	Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением	Продавец: Shandong HUASU Plastic Technology Co.,Ltd.	Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ...
	PanEVAP & MVR system	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
	PanBox welded plate heat exchanger	Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...