Oil mist separation efficiency test bench
Quality assurance and the development of filters/separators/collectors should ideally be conducted under test conditions relevant to the actual conditions encountered. Therefore, oil separators must be tested at high temperatures up to 120°C and, depending on the application type, at high pressures.
Using the modular test system HMT 1000. oil separators (e.g., for separating leaked aerosols in internal combustion engines or for separating oil mist downstream of compressors) can be characterized quickly and accurately, and successfully tested under real-world conditions via isothermal particle measurements up to 120°C:
• Staged separation efficiency
• Load/holding time
• Total separation efficiency/weight analysis
• Pressure loss
Due to the modular layout, individual components of the test bench, such as the high-resolution heated light scattering spectrometer, the heated dilution system KHG 10 D, and the heated aerosol generator PLG 2100. can be easily removed from the HMT 1000 and used for other applications, such as direct measurements on the engine.
At the heart of the HMT 1000 is the light scattering spectrometer, which is used to simultaneously and independently measure particle size and particle number (and thus concentration). With the Promo® 1000 H, very fast, clear, reproducible, and isothermal measurements are possible.
Standard
GB/T 6165-2021
Technical parameters
| Measurement range (size) | 0.18 – 40 µm |
| Volume flow rate | 1 – 25 Nm3/h, 1 – 85 Nm3/h (Other specifications available upon request) |
| External dimensions | Approximately 1.600•2.000•800 mm (H•W•D) |
| Differential pressure measurement | 0 – 5.000 Pa (ande auf Anfrage) |
| Aerosol concentration | Up to 107 particles/cm3. equipped with 2 KHG 10 D |
| Compressed air supply | 6 – 8 bar |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
| Oil mist separation efficiency test bench - lab instrument | We are a professional testing instrument manufacturer offering complete laboratory testing solutions. If you need more information or wish to explo... | |
| Fuel Water Separator Test Bench | The Fuel Water Separator Test Bench is designed to evaluate the water separation performance and cleanliness of fuel filters used in diesel engines... | |
| MST clothing pressure tester | The MST Clothing Pressure Tester/Underwear Pressure tester is used in the body or in the laboratory to easily measure the pressure of elastic band... | |
| Glow wire tester | F242 Glow-wire tester simulates thermal stress from heat sources to test circuit component flammability, widely used in electronics, appliances, et... | |
| Coating Thickness Gauge | The Coating Thickness Gauge is a high-precision contact-type thickness measuring instrument designed for accurate determination of thickness for fi... |
















