Low-Temperature Bending Resistance Tester
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
Application
Cold Flexibility Testing (ISO 4674-2/ASTM D1790):
Samples are bent 10.000–50.000 times at -40°C to simulate polar or alpine conditions.
Results are graded based on crack appearance:
Pass: No visible cracks or coating separation.
Fail: Cracks exceeding 0.5 mm in width.
Standard Test
The tester adheres to international standards for material testing at low temperatures, including:
ISO 4674-2(Rubber- or plastics-coated fabrics – Determination of low-temperature bend test)
ASTM D1790(Standard test method for resistance of organic coatings to the effects of rapid deformation (impact))
GB/T 2423(China’s national standard for environmental testing – Cold tests)
EN 60068-2-1(Environmental testing – Cold tests for electronic components)
SAE J2339(Cold temperature impact resistance for automotive coatings)
These standards ensure consistent evaluation of material behavior under thermal and mechanical stress.
Feature
1. Material Cold Resistance Testing
This test simulates the dynamic bending process of materials such as rubber, plastics, leather, and synthetic fibers in low-temperature environments to detect their resistance to embrittlement and cracking. For example, by setting a -20°C environment, a shoe sole material can be subjected to 25.000 bending cycles to observe crack length and delamination, verifying whether it meets the standards for use in cold regions.
2. Product Reliability Verification
This involves evaluating the structural integrity of finished products such as shoes, automotive seals, and electronic device casings at low temperatures. For example, testing the deformation of a smart casing after 1000 bending cycles in a -10°C environment ensures the product can withstand extremely cold climates.
3. Research and Development and Quality Control
In the new material development stage, the bending performance of different formulations at low temperatures is compared to optimize material selection; in the production process, products are regularly sampled to ensure batch consistency and reduce after-sales complaints.
Parameters
| Parameter | Specification |
|---|---|
| Temperature Range | -70°C to +200°C (adjustable via cryogenic cooling) |
| Bending Angle | 0–180° (adjustable for different material flex requirements) |
| Stroke Frequency | 50–300 cycles/min (programmable) |
| Sample Dimensions | 100 × 20 mm (standard for coatings/films); up to 300 × 50 mm (customizable) |
| Cooling System | Liquid nitrogen or mechanical refrigeration (LC-120 model) |
| Control System | PLC-based with 7-inch touchscreen (multilingual interface) |
| Power Supply | 220V/50Hz, 800W |
| Dimensions | 800 × 600 × 1500 mm (L × W × H) |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Testing apparatus-Back & Butt Forms | Get a quote： Web: qinsun-lab.com Email：serving@qinsun-lab。com The 5th Percentile Female SAE Butt Form is meticulously derived from the NHTSA Hyb... |
 |
Fabric Negative-ion Concentration Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Fabric Negative-ion Concentration Testers typically detect the amount of negative ... |
 |
Small High Efficiency Air Filter | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The small high efficiency air filter test device is a highly targeted filter test ... |
 |
Combustion Flue Gas Treatment System | Get a quote： Web: qinsun-lab.com Email：info@qinsun-lab。com The Combustion Flue Gas Treatment System is suitable for: Laboratory combustion expe... |
 |
Water injection counterweight dummy - lab instrument | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Email: serving@qinsun-lab。com Product Introduction This counterweight dummy can ... |
Похожие товары
 |
PanEVAP & MVR system | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
 |
PanPHE gasketed plate heat exchangers | Продавец: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanPHE gasketed plate heat exchangersare designed with easy access for regular servicing and for ... |
