Flame Spread Tester for Thermal and Acoustic Insulation Materials
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
The Flame Spread Tester for Thermal and Acoustic Insulation Materials is designed to evaluate the flame propagation characteristics of insulation and acoustic materials. You can expose samples to a standard thermal radiation source and ignite them with a controlled flame to determine their critical heat flux. This instrument is FAA-approved and compliant with international standards, providing accurate and repeatable measurements for aerospace, civil aviation, and material development applications.
Standards
This tester conforms to the following national and international standards:
GB/T 27904‑2011 — Test method for flame spread of interior decoration materials
GB/T 25207‑2010 — Classification of combustion performance of building decorative materials
GB 8624‑2012 — Classification of burning behavior of building materials and products
GB/T 16172‑2007 — Determination of heat release rate and total heat release of building materials and products (Cone Calorimeter Method)
BSS 7365 — UK aerospace standard for combustion and smoke density of aerospace composite and interior materials
AITM 2.0053 — European aerospace industry method for heat release rate and smoke evaluation
FAR Part 25 Appendix F Part VI — FAA regulatory requirement for flame propagation, smoke density, and toxicity in civil aircraft cabin materials
Parameters
| Parameter | Specification |
|---|---|
| Dimensions | 1220 × 570 × 520 mm; 1200 × 1150 × 1350 mm; 800 × 800 × 400 mm |
| Weight | 185 kg |
| Thermal Radiation Source | 400 VAC, 3-phase electric heating plate, PID control, ±0.1°C accuracy |
| Radiation Strip Width | 76 mm, six strips, operational up to 704°C |
| Sample Angle | 30° relative to horizontal plane |
| Ignition System | Axially symmetric propane burner, 0.15 mm nozzle |
| Burner Height | Flame at least 51 mm above sample plane |
| Flame Spread Measurement | Laser pointer for accurate monitoring |
| Thermocouple Placement | Back wall 279 mm, right wall 292 mm, below radiation plate 51 mm, ±2°C accuracy |
| Heat Flux Range | ≥60 kW/m², with self-circulating cooling water |
| Heat Flux Mounting | Steel plate 3.2 mm thick, with 3 × 25.4 mm insertion holes |
| Sample Holders | Standard and short versions (for hook-and-loop tests) |
| Data Acquisition | Computer and printer, automatic test timing ±0.1 s |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Filter Dynamic Cycling Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Filter element dynamic cycling test bench is mainly used to test the chemical elem... |
 |
Solid Split-Type Weighted Dummy | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Solid Split-Type Weighted Dummies are widely used by automotive manufacturers both... |
 |
Nanofiber Electrospinning Device | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Nanofiber Electrospinning Device is designed to fabricate nanofibers with di... |
 |
Car seat component clearance test bench | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Car Seat Component Clearance Test Bench is designed to accurately measure and ... |
 |
Airbag-Type Contact Pressure Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Airbag-Type Contact Pressure Tester is designed to evaluate contact pressure b... |
