5-Station Seatbelt Webbing Abrasion Tester， ASTM D6770，commercial vehicle seat belt tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The 5-Station Seatbelt Webbing Abrasion Tester is designed to evaluate the abrasion resistance of webbing materials used in seat belts, lap belts, and shoulder straps. It simulates real-world wear caused by repeated contact and friction between the webbing and the belt hardware.
Application
This bench-top style tester allows the operator to load test specimens, thread seatbelt material over them, and run controlled abrasion cycles. The test automatically stops once the preset number of cycles is reached, after which samples are visually inspected for wear or damage.
Standards
(1) ASTM D6770 – Webbing abrasion resistance test
(2) FED STD 191 – Test method standard for textiles
(3) FLTM BN 163-01 – Ford motor industry seat belt webbing abrasion standard
(4) FMVSS 209 – U.S. Federal Motor Vehicle Safety Standard for seat belt webbing
(5) MIL-232223B – Military seat belt material abrasion requirements
(6) MIL-T8363B – Military specification for textile webbing
(7) SAE J339 – Seat belt webbing abrasion and performance test
(8) S5 1(d) – Vehicle safety textile test method
(9) GB/T 3923.1 – Textile fabrics: Tensile properties of woven fabrics
(10) SAE J114-1994 – Safety belt webbing abrasion requirements
(11) ISO 22612:2017 – Textiles: Resistance to surface wear
(12) ISO 13934-1 – Textile fabrics: Tensile properties of fabrics
Technical Specifications
| Feature | Specification |
|---|---|
| Test Stations | 5 independent test positions |
| Test Type | Seatbelt / Webbing abrasion resistance |
| Tester Style | Bench-top configuration |
| Operation | Manual sample setup and automatic cycle stop upon completion |
| Cycle Control | Programmable digital counter for cycle count input |
| Sample Evaluation | Visual inspection after testing |
| Construction | Rigid frame with precision alignment for repeatable results |
| Drive System | Durable, low-vibration motor ensuring smooth abrasion cycles |
| Safety | Protective housing and emergency stop function |
| Power Supply | To be specified at time of order |
Features
Multi-Station Design: Test up to five samples simultaneously for high efficiency.
Accurate and Repeatable: Consistent abrasion motion ensures reliable results.
Automatic Operation: Machine stops automatically after reaching the preset number of cycles.
User-Friendly: Simple setup and intuitive controls for efficient testing.
Durable Construction: Built from robust materials suitable for continuous use.
Standards-Compliant: Meets major international automotive and military testing standards.
Test Procedures
Prepare seat belt samples and install securely in the five-station clamps.
Adjust friction devices to ensure uniform contact with each sample.
Input desired cycle count (e.g., 2.500 cycles) for each station.
Start automated testing; the machine stops automatically upon completion.
Remove samples and visually inspect for wear; optionally conduct strength tests.
Compare pre- and post-test performance and generate a testing report.
Maintenance Information
Keep friction rollers and contact surfaces clean and free from debris.
Periodically inspect motor, drive system, and clamps for wear.
Calibrate cycle counters to maintain accurate readings.
Ensure protective covers and emergency stop functions remain operational.
Store tester in a dry, clean environment to prevent corrosion or damage.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Solid Material Burning Rate Analyzer | Whats/App: +86 156 1874 6768 Web: standard-groups.com -groups.com Product Introduction This product complies with "Recommendations on the Trans... |
 |
Total Hip Joint Prostheses Wear Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 0651.1-2016 (China): Specifies wear testing parameters for total hip prosthe... |
 |
Laboratory 3D Surface Topography Profiler | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system’s analysis capabilities and software design support surface met... |
 |
Coating abrasion resistance tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction: The determination of scratch resistance of the coating is very simil... |
 |
Combustion flue gas treatment system supplier for industrial plants | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Combustion Flue Gas Treatment System is suitable for: Laboratory combusti... |
Похожие товары
 |
Metal Angular Fixator Testing Machine | Продавец: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Metal Angular Fixator Testing Machine... |
 |
Bone Plate Four-Point Bending Fatigue Testing Machine | Продавец: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Bone Plate Four-Point Bending Fatigue... |
 |
Bone Plates Static Four - point Bending Tester | Продавец: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Bone Plates Static Four-Point Bending... |
 |
Spinal Internal Fixation System Assembly Testing Machine | Продавец: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Spinal Internal Fixation System Assem... |
 |
Spinal Internal Fixation System Component Testing Machine | Продавец: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Spinal Internal Fixation System Compo... |
