Stick Slip Test Stand for Material Combinations(G-SSP)，Stick-slip behavior testing equipment

The Stick-Slip Tribological Test Stand is a laboratory testing system used to evaluate friction-induced stick-slip behavior and squeak noise risk between material pairs under controlled load and motion conditions.

You can use this equipment to measure static friction force, dynamic friction force, coefficient of friction, maximum friction acceleration, and vibration frequency, providing quantitative data for tribological and NVH evaluation.

Application

You can use this test stand to predict friction noise and stick-slip behavior of automotive interior and exterior materials during real use conditions.

It is suitable for the following products and components:

(1) Automotive seat components, instrument panels, door trims, carpets, and interior trim parts

(2) Plastic–plastic, plastic–metal, metal–metal, and composite material friction pairs

(3) Brake pedals, handbrake handles, gear selectors, and tactile control components

(4) Materials with surface treatments, coatings, or layered structures

(5) Material compatibility evaluation to prevent squeak and rattle issues

(6) Tribological performance comparison during material selection and design validation

Standards

(1) VDA 230-206 – Test Method for Evaluation of Friction Noise

(2) BMW PR315 – Friction Noise Evaluation Specification

(3) BMW TL 9169300 – Technical Specification for Friction Properties

(4) VW / Audi / Porsche TL 52064. PV3981 – Friction Noise Testing Standards

(5) Ford L400 – Friction Noise Test Specification

(6) TPJLR-00-230 – Jaguar Land Rover Friction Noise and Tribology Standard

Parameters

Item	Specification
Test Specimen Size	Customized according to customer requirement
Normal Load Range	0–500 N, adjustable
Test Stroke	0–50 mm, adjustable
Vibration Frequency	0–200 Hz, adjustable
Static Friction Force Resolution	0.01 N
Dynamic Friction Force Resolution	0.01 N
Maximum Friction Acceleration Resolution	0.01 m/s²
Coefficient of Friction Range	0–2.0
COF Accuracy	±0.01
Data Acquisition	Real-time display with curve output
Power Supply	220 V / 50 Hz or 110 V / 60 Hz

Features

(1) High-precision force and acceleration sensors ensure reliable friction and vibration data.

(2) Supports both static and dynamic friction testing under controlled conditions.

(3) Adjustable load, stroke, and vibration frequency to meet different OEM standards.

(4) Suitable for various material combinations including plastics, metals, and composites.

(5) Real-time data acquisition with force, COF, acceleration, and vibration curves.

(6) Stable mechanical structure with vibration-resistant design for repeatable results.

Accessories

(1) Adjustable specimen clamping fixtures

(2) High-precision force sensor

(3) High-sensitivity acceleration sensor

(4) Test specimens supplied by customer

(5) Control and data acquisition system (PC or PLC based)

(6) Safety enclosure

(7) Standard load weights

Test Procedures

(1) Clean and prepare the test specimens according to the applicable standard.

(2) Mount the specimens securely in the clamping fixtures.

(3) Set the required normal load, stroke, vibration frequency, and test duration.

(4) Configure data acquisition parameters and sampling rate.

(5) Start the test and apply friction motion under controlled conditions.

(6) Record friction force, coefficient of friction, acceleration, and vibration signals.

(7) Stop the test after completion and save all measurement data.

Maintenance Information

(1) Regularly inspect fixtures, sensors, and mechanical moving parts.

(2) Calibrate force and acceleration sensors at defined intervals.

(3) Keep sliding surfaces clean to prevent contamination-induced measurement errors.

(4) Check electrical connections and data acquisition stability.

(5) Store the equipment in a clean and controlled laboratory environment.

Другие товары поставщика

	Walk-in Humidity Test Chamber High and Low Temperature Aging Room	Applications Walk-in High-Temperature Aging Chambers are typically assembled on-site using insulated panels (double-sided color steel sheets with ...
	Fiber Blend Ratio Tester	The Fiber Blend Ratio Tester is designed to measure the electrical resistance of a compacted fiber sample and convert it into the specific resistan...
	STD Battery short-circuit tester丨STD Battery short-circuit chamber	Product Introduction Battery Short Circuit Tester is a device that can be applied to the external short circuit test process of lithium ion batter...
	Cork Puncture and Chip Detection Instrument	The rubber stopper puncture debris detector is a device specifically used to detect the number of debris generated during the puncture process and ...
	Vacuum Ball - Disk Friction Tester	A vacuum ball-on-disk friction tester is a device used to simulate friction and wear behavior under actual operating conditions, in order to evalua...

Все товары поставщика

Похожие товары

	Damp Freeze and Thermal Cycling Tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Damp Freeze and Thermal ...
	Alternative to BBA steady state solar simulator tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The BBA Steady-State Solar S...
	Alternative to PV Hail Impact Tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Hail Impact Test Machine...
	Solar Panel Insulation Resistance Test Chamber	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The tester is applicable in ...
	90-Degree Peel Tester for PV Backsheets	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The tester is suitable for e...