NEXGEN Aviation Fuel Burner，Jet fuel combustion test equipment

The NEXGEN Aviation Fuel Burner is an FAA-approved, next-generation aircraft fuel combustion testing instrument. It builds upon the operational principles of previous FAA-recognized burners, including Park DPL 3400. Lennox Model OB-32. and Carlin Model 200 CRD, which are now discontinued. You can use the NexGen Burner to precisely control fuel and airflow parameters during tests while maintaining compatibility with future FAA upgrades. This burner supports a wide range of aviation fuel combustion tests, ensuring accurate, reproducible evaluation of flame spread, heat release, and fire resistance for aircraft materials.

Application

The NexGen Aviation Fuel Burner is suitable for a variety of aerospace testing applications:

Aircraft Cabin Materials: Evaluate seat cushions, insulation, and cabin panels for flame spread and smoke toxicity in compliance with FAR 25.853. FAR 25.855. and FAR 25.867.

Cargo Compartment Materials: Conduct burn-through resistance testing on cargo liners and panels.

Soft and Hard Tubing Assemblies: Test fuel, hydraulic, and electrical conduit assemblies under controlled flame conditions.

Electrical Components and Engine Assemblies: Assess fire resistance of electric motor housings, connectors, and wiring.

Material R&D and Certification: Support aerospace material certification for FAA and international standards.

Typical test materials include seat foams, insulation panels, composite laminates, electrical housings, tubing, and other interior aircraft components.

Standards

The NexGen Burner supports compliance with multiple international aviation and safety standards:

BSS 7303 – Aerospace composite material combustion and heat release testing.

BSS 7323 – Aerospace material smoke generation and toxicity evaluation.

BSS 7387 – Aerospace material flame spread and combustion behavior testing.

AITM 2.0056 – Cone calorimeter heat release rate measurement.

AITM 2.0010 – Smoke generation measurement for aerospace materials.

AITM 2.0009 – Flame spread performance measurement for aerospace materials.

FAR Part 25 Appendix F Part II – Cabin material combustion, flame spread, and smoke toxicity testing.

FAR Part 25 Appendix F Part III – Cabin material flame spread and smoke performance measurement.

FAR Part 25 Appendix F Part VII – Cabin material heat release and combustion performance testing.

ISO 2685:1998 – Fire resistance testing methods for aerospace materials.

Domestic Standards: MH/T 6086. HB 7263. MH/T 6041. GB/T 25352. HB 7044 – Various fuel combustion and burn-through testing methods.

Parameters

Parameter Category	Details
Dimensions	20 mm (W) × 1150 mm (L) × 250 mm (D)
Weight	10 kg
Flame Temperature	≥ 2000 ± 50 ℉
Flame Heat Flux	≥ 10.6 W/cm²
Power Supply	220 V, 5 A
Fuel Requirement	Aviation Grade 2 Fuel
Gas Requirement	Compressed air ≥ 120 psi

Features

Burner cone made from corrosion-resistant, high-temperature alloy.

Complete assembly includes diffuser, fuel nozzle, igniter, fuel rail, mounting bracket, ventilation duct, housing, silencer, and acoustic barrier.

Equipped with fuel pressure gauge, fuel solenoid valve, fuel temperature sensor, air regulator, and air temperature sensor.

Temperature-controlled fuel and air baths (≥ 2 × 0.14 m³) maintain stable testing conditions.

Adjustable fuel nozzle and air pressure allow compliance with various test standards.

Insulation blankets cover fuel lines and burner body for safety and heat containment.

Capable of providing flame temperatures of at least 2000 ± 50 ℉.

Capable of providing flame heat flux of at least 10.6 W/cm².

Accessories

Fuel and air temperature control bath

Fuel solenoid valve and pressure gauge

Igniter assembly

Adjustable fuel nozzle

Insulation blankets and acoustic silencer

Mounting brackets and ventilation duct

Air regulator and temperature sensors

Test Procedures

Ensure installation space allows safe operation and access.

Connect the burner to 220 V, 5 A power supply.

Connect aviation-grade fuel and confirm compressed air supply ≥ 120 psi.

Mount the burner securely with insulation blankets applied to fuel lines and housing.

Adjust fuel nozzle and air pressure according to the selected test standard.

Activate the igniter to start the flame.

Monitor fuel flow, air pressure, flame temperature, and heat flux using gauges and sensors.

Conduct burn-through or flame spread tests on the sample material.

Record all test data for compliance reporting.

Shut off fuel and air supply, and allow the burner to cool before disassembly.

Maintenance Information

Regularly inspect burner cone, fuel nozzle, and igniter for corrosion or wear.

Verify fuel and air lines for leaks or blockages before each test.

Calibrate temperature and pressure sensors periodically.

Clean insulation blankets and acoustic components as required.

Replace worn or damaged safety devices immediately to maintain operational integrity.

Другие товары поставщика

	Laminoplasty Plate System Fatigue Testing Machine	Standard ASTM F2193-18: Specifies static/fatigue testing protocols for spinal constructs, including lamina fixation plates. ISO 12189-1: Defines ...
	industrial abrasion testing equipment	Applications The G282 Universal Abrasion Tester performs flat abrasion, curved abrasion, edge abrasion, folded edge abrasion, and resistance to fr...
	Nissan Scratch Testing Equipment	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application You can use this tester to: Assess scratch resistance of automotive interior ...
	Carbon Black Content meter	Standard GB 13021-1991: Determination of carbon black content in polyethylene compounds. GB/T 2951.41-2008: Test method for carbon black and ash ...
	Fiber Blend Ratio meter	Product Introduction: It is used to measure the resistance value with a certain density under a certain geometry, and then converts it into the sp...

Все товары поставщика

Похожие товары

	Damp Freeze and Thermal Cycling Tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Damp Freeze and Thermal ...
	Alternative to BBA steady state solar simulator tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The BBA Steady-State Solar S...
	Alternative to PV Hail Impact Tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Hail Impact Test Machine...
	Solar Panel Insulation Resistance Test Chamber	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The tester is applicable in ...
	90-Degree Peel Tester for PV Backsheets	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The tester is suitable for e...