Gas Explosion Pressure Test Apparatus，ISO 10156 combustible gas explosion test apparatus
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Gas Explosion Pressure Test Apparatus is designed to measure the explosion characteristics of gases in a sealed testing chamber. By filling the evacuated chamber with the test gas and igniting it under controlled conditions, the system automatically records internal pressure and temperature changes. This allows determination of maximum explosion pressure (Pmax), explosion pressure rise rate, and maximum explosion pressure rise rate. The apparatus is suitable for evaluating gas release Pmax values in compliance with UL 9540A standards. Note that gas mixture preparation or liquid flammable substance evaporation equipment is not included and must be configured separately if required.
Application
The Gas Explosion Pressure Test Apparatus is suitable for:
Measurement of maximum explosion pressure (Pmax) and pressure rise rate of industrial and laboratory gases.
Testing gases released from battery systems or other energy storage devices according to UL 9540A.
Laboratory research on explosion characteristics of various combustible gases.
Specific Testing Equipment:
Gas sample chambers for combustion/explosion testing
Pressure and temperature data acquisition systems
Industrial and laboratory safety testing devices
Standards
The system conforms to the following national and international standards:
BS EN 15967:2011 – Determination of maximum explosion pressure and maximum rate of pressure rise of gases and vapours
UL 9540A – Standard for Testing Energy Storage Systems and Equipment
ISO 10156 – Gases and Gas Mixtures – Determination of Flammability Limits
ASTM E1226 – Standard Test Method for Explosibility of Dust Clouds
Parameters
| Unit | Specification |
|---|---|
| Explosion Pressure Acquisition | Dynamic data acquisition card, 24-bit resolution, 128 KS/s sampling frequency |
| Chamber Interior | Built-in 19-inch touch screen, integrated electrical control circuits for mobility |
| Test Container | Sphere structure, internal volume ≈ 20 L, internal radius 168 mm, wall thickness 12 mm, stainless steel, max. pressure 3 MPa |
| Chamber Pressure Rating | Maximum 3 MPa, constant endurance ≥ 2 MPa, engineering safety valve rated 2.5 MPa |
| Ignition Electrode | Center-mounted, diameter 4 mm, tip angle 60°, distance between tips ≈ 5 mm |
| Thermocouple | K-type armored, range 0–1000 °C, accuracy 0.1 °C |
| Explosion Container Dimensions | 1800 (L) × 750 (D) × 1750 (H) mm |
| Control Box Dimensions | 650 (W) × 675 (D) × 1750 (H) mm |
| Power Supply | AC 220 V, 50/60 Hz |
| Weight | Approx. 330 kg |
| Auxiliary Gas Source | Nitrogen |
Features
Electrical control cabinet with metal frame and electrostatic spray finish; resistant to dirt, wear, and oil; easy to clean and visually appealing.
Siemens PLC with analog modules controls vacuum, purging, temperature, and pressure readings; real-time monitoring of temperature, pressure, explosion pressure, and explosion slope.
Test data can be exported as Excel, Word, or PDF for reporting and analysis.
Sphere front features explosion-proof observation window; top equipped with threaded ignition device.
Thermocouple mounted via rear flange, replaceable for maintenance or specific testing needs.
Multiple interfaces for vacuum, sample gas inlet, purging, manual sampling, and pressure monitoring; includes several ½-inch ports for additional customer-configured devices.
Ignition electrode fixed on removable threaded flange for easy cleaning of carbon deposits.
Thermocouple fixed with threaded ferrule interface for easy installation and sealing.
Manual ball valve for post-test gas sampling and analysis.
Accessories
Stainless steel spherical test container
Explosion-proof observation window
Ignition electrode assembly
K-type armored thermocouple with flange and ferrule interfaces
Siemens PLC and analog modules
19-inch touch screen
Electrical control cabinet with industrial PC and data acquisition modules
Manual ball valve
Safety pressure relief valve (2.5 MPa)
Auxiliary nitrogen supply interface
Test Procedures
Ensure the chamber is evacuated and all connections are secure.
Fill the test container with the desired gas sample to the required concentration.
Activate the PLC-controlled system to monitor temperature and pressure in real time.
Initiate ignition via the central electrode.
Observe internal explosion event through the explosion-proof window.
Record pressure, temperature, explosion slope, and rise rate via dynamic data acquisition system.
Collect gas samples post-test using manual ball valve for further analysis.
Export all recorded data for report generation in Excel, Word, or PDF format.
Maintenance Information
Inspect and clean the ignition electrode regularly to remove carbon deposits.
Verify thermocouple calibration and replace if necessary.
Check all ports, flanges, and threaded interfaces for gas-tight integrity.
Ensure PLC, data acquisition modules, and industrial PC are operating correctly.
Clean observation window to maintain visibility during tests.
Test safety valves and pressure relief systems periodically for proper functionality.
Conclusion
The Gas Explosion Pressure Test Apparatus provides a comprehensive solution for evaluating explosion characteristics of gases under controlled laboratory or production conditions. Its integrated sphere design, real-time data acquisition, precise PLC control, and flexible interfaces allow accurate measurement of maximum explosion pressure, pressure rise rate, and related parameters. The robust construction, user-friendly operation, and compliance with international standards make it ideal for research, industrial safety testing, and energy storage system evaluation.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Damp Freeze and Thermal Cycling Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The Damp Freeze and Thermal Cycling Test Chamber is suitable for: Damp-freeze... |
 |
Needle Flame Test Machine, IEC60695-2-2，ANSI needle flame test | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction： TESTECH Needle Flame Tester is in accordance with national standards IEC6069... |
 |
ASTM F1566 Mattress Durability Fatigue Testing Machine Manufacturer Direct China | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features You can control testing parameters precisely using the PLC touchscr... |
 |
Customized leather flexing machine for uppers | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications (1) Men’s and women’s leather uppers: High-quality ... |
 |
Abrasion and scratch failure simulation tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Scratch resistance testing of plastic and polymer materials Surface performan... |
Похожие товары
 |
Laser Cutting Machines | Продавец: Chanxan (Changshu) Laser Technology Co., Ltd. | Laser Cutting Machines PrecisionLaser Cutting Systemsfor Film, Glass & Industrial Materials ... |
 |
Precision Laser Micromachining Machine | Продавец: Chanxan (Changshu) Laser Technology Co., Ltd. | Precision Laser Micromachining Machine| Ultrafast Laser Micromachining Systems Chanxan provides ... |
 |
Ultrafast Laser Systems | Продавец: Chanxan (Changshu) Laser Technology Co., Ltd. | Ultrafast Laser Systems Femtosecond Laser System Ultra-precision femtosecond laser systemfor hi... |
 |
Industrial Laser Equipment Manufacturer | Продавец: Chanxan (Changshu) Laser Technology Co., Ltd. | Industrial Laser Equipment Manufacturer for Precision Cutting, Marking & Micromachining Chan... |
 |
Common Rail Injector Valve F00R J02 012 | Продавец: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
