Robot HEPA/ULPA Filter Scanning System，robotic filter leak and efficiency test system

Whats/App: +86 156 1874 6768

Web: standard-groups.com

The Robot HEPA/ULPA Filter Scanning Detection System is designed to evaluate both overall and local particle filtration efficiency of 2D and 3D filter elements, including leakage detection. You can perform efficiency testing using multiple aerosol types, including DEHS, paraffin oil, and PSL. The system integrates optical particle counters (OPC) by default and can optionally use condensation particle counters (CPC) or scanning mobility particle sizers (SMPS) for size-classified aerosol measurements. Initially designed for moderate-flow panel filters and cartridges, the system can be expanded for higher-flow applications.

Application

You can apply this system for:

Product Development & Quality Control: Evaluate and ensure HEPA/ULPA filters meet high-efficiency particle removal requirements.

Filter Scanning: Scan both panel filters and cartridges for comprehensive inspection.

3D Scanning: Support V-shaped or other 3D filters for detailed local efficiency mapping.

High-Flow Filter Testing: Expand the system to test higher-flow filters as needed.

Innovative Testing: Automated 3D scanning increases flexibility and precision compared to conventional methods.

Standards

The system is compliant with, but not limited to:

(1) GB 4706.1 – Safety of household and similar electrical appliances, Part 1: General requirements.

(2) EN 1822 – High-efficiency air filters (HEPA and ULPA) – Design and test methods.

(3) JIS B 9900 – Japanese industrial standard for air filtration devices.

(4) IEST-RP-CC001 – Performance and testing of cleanroom air filters for HEPA/ULPA.

(5) ASTM F1471 – Standard test for particle contamination in air and HEPA filter evaluation.

(6) ISO 29463-5 – HEPA/ULPA filter performance evaluation, Part 5: Filter efficiency and leakage detection.

(7) ISO 29463-4 – HEPA/ULPA filter performance evaluation, Part 4: Aerosol testing requirements.

Parameters

Parameter	Specification
Test Flow Rate	1 … 300 m³/h
Differential Pressure Range	50 … 5000 Pa
Scanning Speed	5 … 100 mm/s
Sample Dimensions (W × H × D)	Panel: 50–500 × 30–500 × 7–280 mm; Cartridge: 40–350 × 40–350 × 45–600 mm
Aerosol Media	DEHS, Paraffin Oil, PSL
Compressed Air Supply	Max 6.0 bar
Power Supply	3 × 400 VAC, 32 A
Aerosol Generation	DEHS, Paraffin Oil, PSL
Aerosol Measurement	OPC, CPC, SMPS
System Dimensions (W × H × D)	4000 × 4000 × 3000 mm

Features

Automated 3D Scanning: First commercial solution for fully automated 3D filter scanning.

Flexible Sample Sizing: You can adjust sample dimensions to accommodate different filter types.

Rapid Implementation: Robot programming allows quick adaptation to new scanning protocols.

Multiple Aerosol Options: Supports DEHS, paraffin oil, and PSL for precise efficiency and leakage testing.

Advanced Measurement Technology: OPC, CPC, and SMPS integration for comprehensive particle size and efficiency evaluation.

Accessories

(1) DEHS aerosol generator – for DEHS aerosol production.

(2) Paraffin oil aerosol generator – for paraffin oil aerosol production.

(3) PSL aerosol generator – for PSL aerosol production.

Test Procedures

Preparation:

Select the filter type and ensure it fits within the system’s sample range.

Set up the aerosol generator, select the appropriate aerosol type, and preheat the system.

Testing:

Install the filter securely on the robot work platform.

Start the scanning system; the robot will automatically perform the scanning operation according to set parameters.

Data Analysis:

Collect efficiency and leakage data via OPC, CPC, or SMPS.

Generate detailed filter performance reports, including overall efficiency, local leakage points, and MPPS curves.

Maintenance Information

Wear appropriate PPE, including gloves and protective eyewear.

Ensure proper ventilation when handling aerosols.

Regularly inspect aerosol generators, particle counters, and robot components.

Keep the system clean and calibrated to maintain accurate performance.

Другие товары поставщика

	Artificial turf wear tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com An artificial turf wear tester is a device specifically designed to evaluate the wear resis...
	Walk-In Thermal Comfort Environmental Chambe	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards Internal compliance with laboratory safety and electrical standards. Temperatur...
	Catheter Sliding Performance Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Catheter Sliding Performance Tester is professionally used for measuring the surface fr...
	Scratch Resistance Tester KK-01，ISO 19252 abrasion and scratch protective material tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The KK-01 Scratch Resistance Tester is designed to evaluate the scratch resistance of plast...
	Protective Clothing Resistance Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Related Standards GB/T 22042 - 2008 Clothing - Anti-static Performance - Test Method for S...

Все товары поставщика

Похожие товары

	ER4047 Aluminum Mig Welding Wire	Продавец: 868776	Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing reliable welding material...
	ER4043 Silicon Aluminum Welding Wire	Продавец: 868776	Hangzhou Kunli Welding Materials Co., Ltd. specializes in manufacturing high-quality welding mate...
	Choosing the Right Equipment for Heavy-Duty Cleaning	Продавец: Taizhou Feike Mechanical Technology Co., Ltd.	FEIKE’s High Pressure Washer is designed for industrial cleaning, equipment maintenance, ve...
	ER4043 Silicon Aluminum Welding Wire	Продавец: 868776	Hangzhou Kunli Welding Materials Co., Ltd. offers ER4043 Silicon Aluminum Welding Wire for alumin...
	Высокоскоростная экструзионная линия для производства гофрированных труб с двойными стенками из ПЭВП с водяным охлаждением	Продавец: Shandong HUASU Plastic Technology Co.,Ltd.	Формы имеют структуру с двойным каналом потока и фильерную головку, обработанную азотированием и ...