Damp Freeze and Thermal Cycling Test Chamber

Производитель: Standard Groups

Все товары поставщика

The Damp Freeze and Thermal Cycling Test Chamber is suitable for:

Damp-freeze and temperature cycling performance testing of PV modules

Environmental adaptability evaluation during R&D

Type certification and qualification testing of PV modules

Indoor laboratory simulation of outdoor temperature and humidity cycles

Quality control and factory performance verification of PV modules

Scientific research and environmental durability studies

Standards

The chamber complies with the following international standards:

(1) GB/T IEC 61215 – Crystalline Silicon Terrestrial Photovoltaic Modules – Design Qualification and Type Approval

(2) UL 1703 – Safety Standard for Photovoltaic Modules

Item	Technical Specification
Temperature Range	-40～85℃
Temperature Fluctuation	≤±1℃
Temperature Deviation	≤±1℃
Temperature Uniformity	≤±2℃
Heating/Cooling Rate	Compliant with IEC 61215 requirements
Humidity Range	30～98%RH
Relative Humidity Deviation	±3%FS; 85±2%RH; 90±2%RH
Humidity Fluctuation	±2%RH
Humidity Uniformity	≤2%RH
Thermal Cycling Performance	Module surface temperature change ≤100℃/h, minimum extreme temperature holding time ≥10 minutes, single test up to 200 cycles or 50 loops
Sample Capacity	Up to 12 PV modules
Inner Chamber Size	1.5 × 2.5 × 1.5 m (L×W×H)
Outer Chamber Size	2.5 × 3.0 × 2.5 m (L×W×H)
Inner Material	SUS#304 high-temperature resistant mirror stainless steel
Outer Material	Anti-rust steel with powder coating
Insulation	High-density rigid PU foam + glass wool
Control System	Automatic program control; independent heating/humidifying/dehumidifying/cooling
Display Panel	Touchscreen, real-time curves of set and actual values
Communication Interface	RS-485. supports software data storage, printing, and download
Interface Language	English/Chinese switchable
Refrigerant	HFC environmentally friendly, auto-switching valve
Power Supply	380V, 50/60Hz

	Finished shoes sole bending tester	Finished shoes sole bending testeris used to test shoe stiffness/rigidity by flex shoe to certain angle by certain force. The shoe bending stiffne...
	Water injection counterweight dummy \| Testing Equipment	Product Introduction This counterweight dummy can be filled with water, the torso and the bottom are separated, independently filled with water o...
	Racing Seat Headrest Restraint and Front-Rear Impact Testing Machine	The Racing Seat Headrest Restraint and Front-Rear Impact Testing Machine is designed to evaluate the strength and impact performance of racing seat...
	Cross Hatch Cutting and Adhesion Tester	The Cross Hatch Cutting and Adhesion Testing provides a relative movement of the scratch head to the surface of the material, and finally evaluates...
	ASTM-D1044 Taber Abrasion Test Equipment	This tester applied to do the test of wear-resistant in skin, leather, cloth, paint, paper, flooring, plywood, glass and natural rubber. The method...

Automotive seat durability and strength testing machine	Продавец: Standard International Group (HK) Limited	The Automotive Seat Three-Station Headrest and Backrest Static Strength Testing Machine is design...
Racing Seatback Headrest Restraint Device, Front and Rear Impact Testing Machine	Продавец: Standard International Group (HK) Limited	The Racing Seat Headrest Restraint and Front-Rear Impact Testing Machine is designed to evaluate ...
Laboratory car wash simulator for automotive testing	Продавец: Standard International Group (HK) Limited	The Laboratory Car Wash Simulator is a specialized testing system designed to replicate automatic...
Steam jet durability testing machine	Продавец: Standard International Group (HK) Limited	The Steam Jet Test Chamber is designed to evaluate the durability and performance of materials an...
Seat Bumping and Creep Test Bench	Продавец: Standard International Group (HK) Limited	Application Applications of the Single Station Jounce Tester include, but are not limited to, th...