Pendulum and charpy impact test machine
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Applications
This advanced Pendulum Impact Tester is specifically tailored for evaluating the impact resistance of various materials, including plastic film, composite film, metallic foil, and more. With applications ranging from scientific research and academic education to laboratory use, research institutes, and quality control departments, Pendulum Impact Tester is a versatile solution for precise and reliable testing.
Film:It is suitable for testing the resistance of plastic film, thin film and composite film to pendulum impact. Such as food and drug packaging bags with PE/PP composite film, aluminum plating film, aluminum plastic composite film, nylon film, etc
Paper, Sheet Testing:It is suitable for testing the impact resistance of paper and paperboard, such as aluminized paper for cigarette packaging and aluminum-plastic paper composite material for Tetra Pak packaging.
Standards
ASTM D3420:Standard Test Method for Flexural Properties of Plastics
ASTM D256:Standard Test Method for Izod Impact Strength of Plastics and Reinforced Plastics
ASTM D4812:Standard Test Method for Tensile Properties of Thermoplastic Films and Sheeting
ASTM D6110:Standard Test Method for Tensile Properties of Rubber and Elastomers (Dumbbell Shapes)
ISO 180:Plastics — Determination of Izod impact strength
ISO 179:Plastics — Determination of Charpy impact strength
ISO 8256:Plastics — Cellular plastics — Determination of tensile properties
ISO 7628:Fibre-reinforced plastics — Determination of flexural properties
ISO 9854:Textiles — Determination of tensile properties — Part 1: Breaking force and elongation at break
DIN 53453:Kunststoffe — Bestimmung der Schlagzähigkeit (Charpy-Verfahren)
DIN 53753:Kunststoffe — Bestimmung der Biegeeigenschaften
Technical Parameters
| Technical Parameter | Specification |
|---|---|
| Applications | Impact Testing, Sample Testing, Strength Testing |
| Materials | Aluminum, Composites |
| Weight | 110 kg |
| Dimensions | 630×500×760 mm (W×D×H) |
| Power | 110-240VAC, 50-60hz |
| Display | 160 x 128 dots graphic LCD module with alphanumeric keypad |
Accessoriess
Izod Vice
Charpy Rest
Tension Impact Rest (Specimen in bed method)
Puncture Impact Fixture
Pipe Rest
Component fixture to customer requirements
Variable weight impact hammers up to 50 Joules
Thermal printer
Full safety enclosure
Low-temperature chamber
Test Procedures
1. Environmental Condition Control
Samples must be pretreated for at least 4 hours in an environment with a temperature of 23±2℃ and humidity of 45%～55% to avoid the influence of temperature and humidity on material properties (refer to GB/T 8809 and ISO standards).
2. Sample Preparation and Installation
Samples should be uniformly 100mm×100mm in size, with no wrinkles, bubbles, or damage on the surface.
Select the punch size according to the material characteristics (e.g., Φ12.7mm for thin films, Φ25.4mm for thick composite films) and match the corresponding fixture.
3. Equipment Parameter Calibration
Before testing, the initial angle of the pendulum (90°), impact velocity (2.5m/s), and energy zero point must be calibrated to ensure compliance with standards such as ASTM D3420.
Verify the equipment accuracy using standard samples to avoid errors caused by mechanical wear or sensor drift.
4. Data Acquisition and Analysis
Record the energy consumed by the punch during the impact process and analyze the material deformation characteristics in conjunction with the stress-strain curve.
Compare the material to standard thresholds (e.g., the impact resistance of food packaging composite films should be ≥2J) to assess whether the material meets the application requirements.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Bone Screw Mechanical Performance Test Equipment ISO/ASTM | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards YY/T 1504. ASTM F543: standard specifies a test method for measur... |
 |
Sole Sand Bath Heat Insulation Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The sand bath component of the Shoe Heat Insulation Tester is primarily used to evaluate th... |
 |
Automatic Transmission Fluid Anti-Shudder Friction Tester，Transmission fluid friction performance tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Passenger Vehicle Automatic Transmission Fluid Anti-Shudder Friction Tester is a specia... |
 |
Safety Helmet Lateral Rigidity Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard GB 2812: Safety Helmets (China National Standard) Equivalent Compliance: ISO 622... |
 |
Accurate Combustion Threshold Measurement | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Minimum Ignition Temperature Tester is a way of testing the sensitivity o... |
Похожие товары
 |
MMA-120 Handheld Arc Welder | Продавец: 871183 | The MMA-120 Handheld Arc Welder from ChuangLi Electronic Technology Co., Ltd. is designed for con... |
 |
SHX Series Circulating Fluidized Bed Steam Boiler | Продавец: Hebei Genjux Boiler Co.,Ltd | Capacity: 10-35 t/hWorking pressure: 1.25-2.5 MPaOperating temperature: 194-400 ℃Applicable to bi... |
 |
YQ(Y)W Series Oil/Gas Fired Vertical Thermal Oil Boiler | Продавец: Hebei Genjux Boiler Co.,Ltd | Capacity: 7000-29200 KWOperating pressure: 0.8-1.0 MPaOperating temperature: 320℃Operating mode: ... |
 |
DHL Series Coal-Fired Steam Boilers | Продавец: Hebei Genjux Boiler Co.,Ltd | Capacity: 35-75 t/hOperating pressure: 1.25-5.4 MPaOperating temperature: 194-485℃Applicable to b... |
 |
SZL Series Biomass Steam Boiler | Продавец: Hebei Genjux Boiler Co.,Ltd | Capacity: 6-35 t/hWorking pressure: 1.0-2.5 MPaOperating temperature: 184-350 ℃Applicable fuel bi... |
